usps dangerous goods test compliance essentials explained

Published

usps dangerous goods test
Table of Contents

The USPS dangerous goods test represents a critical checkpoint for shippers handling hazardous materials, ensuring compliance with federal regulations and mitigating risks during transit. Navigating the intricate web of Hazardous Materials Regulations (HMR) and International Air Transport Association (IATA) standards demands precision, as misclassification or improper packaging can lead to shipment rejection, fines, or safety hazards. This guide dissects the regulatory framework, packaging protocols, and documentation demands to equip logistics professionals with actionable insights for seamless and lawful dangerous goods shipments.

From identifying restricted substances through the USPS Hazardous Materials Table to mastering the distinctions between carriers like FedEx and DHL, this resource provides structured workflows, comparative analyses, and real-world examples to demystify the process. Whether verifying limited-quantity exemptions or recertifying reusable packaging, clarity and consistency are paramount—this guide ensures every step aligns with USPS and international safety mandates.

usps dangerous goods test

Regulatory Framework for USPS Dangerous Goods Compliance

The shipment of dangerous goods via the United States Postal Service (USPS) is governed by a strict regulatory framework designed to ensure safety during transit. Compliance requires adherence to the Hazardous Materials Regulations (HMR) under 49 Code of Federal Regulations (CFR) Part 171-179, as well as International Air Transport Association (IATA) Dangerous Goods Regulations (DGR) for international shipments. USPS aligns its policies with these federal and international standards while maintaining its own specific prohibitions, packaging requirements, and documentation protocols. Failure to comply may result in fines, confiscation, or legal penalties, underscoring the necessity for shippers to understand and apply these regulations accurately.

The USPS regulatory structure integrates elements from the Department of Transportation (DOT) and IATA, but with unique restrictions tailored to its mail and package delivery systems. For example, while DOT regulations focus on ground and air transport, USPS applies additional constraints due to its high-volume, mixed-parcel handling environment. The following sections outline the primary regulatory components, prohibited/restricted materials, verification procedures, and comparative analysis with other carriers.

Primary USPS Regulations Governing Dangerous Goods

The USPS dangerous goods regulations are primarily derived from the following sources:

- 49 CFR Parts 171–179 (HMR): The foundational U.S. federal regulations for hazardous materials transportation, which USPS adopts with modifications for mailable items. Key sections include:

  • Part 172 (Hazardous Materials Table): Classifies hazardous materials by name, identification number, and packaging requirements.
  • Part 173 (Packaging Standards): Specifies packaging types (e.g., UN-certified drums, boxes) and performance criteria.
  • Part 174 (Marking and Labeling): Defines requirements for hazard labels, shipping papers, and placards.
  • Part 176 (Shipping Papers): Outlines documentation obligations, including the USPS Hazardous Materials Declaration Form (PS Form 3647).
  • - IATA Dangerous Goods Regulations (DGR): Applicable for international shipments, particularly those transiting via air. USPS requires compliance with IATA Packing Instructions (PIs) and Special Provisions (SPs) for air mailable dangerous goods.

    - USPS Domestic Mail Manual (DMM) and International Mail Manual (IMM): Provide carrier-specific rules, including:

  • DMM Section 505.1 (Hazardous, Restricted, and Perishable Mail): Lists prohibited and restricted materials.
  • IMM Section 505 (International Hazardous Materials): Details additional restrictions for overseas shipments.
  • Key Principle:
    USPS dangerous goods regulations prioritize safety over convenience, often imposing stricter limits than other carriers to mitigate risks in its automated sorting and delivery systems.

    USPS Prohibited and Restricted Materials

    The USPS maintains a comprehensive list of prohibited and restricted materials, categorized by hazard class and shipping conditions. Below is a structured table summarizing key entries, including exceptions where applicable. For a complete list, refer to the USPS Hazardous Materials Table or DMM/IMM Section 505.
    Material Name Hazard Class USPS Restriction Status Exceptions
    Lithium-ion batteries (packaged with equipment) Class 9 (Miscellaneous) Restricted (requires USPS Lithium Battery Program registration) Exempt if shipped with operating equipment (e.g., power tools) under PS Form 3647 and with UN 3480 markings.
    Aerosols (flammable) Class 2.1 (Flammable Gas) or Class 3 (Flammable Liquid) Prohibited unless specifically authorized (e.g., UN 1950 for non-flammable aerosols). Limited quantities (≤ 0.5 kg net per package) allowed for UN 1950 (non-flammable) or UN 1045 (flammable, ≤ 500 g).
    Corrosives (e.g., sulfuric acid, hydrochloric acid) Class 8 (Corrosive) Prohibited unless in limited quantities with UN-certified packaging (e.g., UN 3082 for batteries). Exemptions apply to pH ≥ 2 or ≤ 12.5 in limited quantities (≤ 1 L or 1 kg).
    Oxidizers (e.g., potassium permanganate) Class 5.1 (Oxidizing) Prohibited unless in limited quantities with UN 1477 packaging. Limited to ≤ 1 kg net per package if stable and properly packaged.
    Radioactive materials (e.g., smoke detectors) Class 7 (Radioactive) Prohibited unless authorized under DOT Special Permit or Nuclear Regulatory Commission (NRC) license. Exemptions for excepted packages (e.g., UN 2910 for consumer products with ≤ 0.002 µCi/gram).
    Compressed gases (e.g., propane, butane) Class 2.1/2.2 (Flammable/Non-flammable Gas) Prohibited unless in limited quantities (≤ 130 g water capacity for non-flammable; ≤ 2 kg for flammable). Allowed as UN 1005 (non-flammable) or UN 1950 (flammable) with proper labeling.
    Magnesium powder Class 4.3 (Dangerous When Wet) Prohibited unless in limited quantities with UN 1427 packaging. Limited to ≤ 5 kg net per package if dry and stable.
    Alcohols (e.g., ethanol, methanol) Class 3 (Flammable Liquid) Restricted (≤ 1 L per package for UN 1170 or UN 1268). Exemptions for ≤ 120 mL if packaged in original retail containers (e.g., hand sanitizer).
    Dry ice (solid carbon dioxide) Class 9 (Miscellaneous) Restricted (≤ 2.5 kg per package, must be UN 1845). Requires ventilation and cold weather shipping label if temperature exceeds 54°C (130°F).
    Note: The table above represents a subset of common materials. USPS updates its Hazardous Materials Table annually; shippers must verify current restrictions via the USPS Hazardous Materials website or consult the DMM/IMM.

    Procedure for Verifying Dangerous Goods Classification

    Determining whether a substance qualifies as a dangerous good under USPS regulations requires a systematic approach using the USPS Hazardous Materials Table, DOT Emergency Response Guide (ERG), and IATA DGR. The following step-by-step procedure ensures accurate classification:

    1. Identify the Substance:

  • Confirm the chemical name, UN/NA number, and hazard class (e.g., flammable liquid, oxidizer). Use the DOT ERG Guide (Section 2) for initial hazard identification.
  • Example: If shipping lithium
  • usps dangerous goods test - Ilustrasi 2

    Packaging and Labeling Requirements for USPS Dangerous Goods

    The United States Postal Service (USPS) enforces strict packaging and labeling standards for dangerous goods to ensure safety during transit. Compliance with these requirements minimizes risks of leaks, fires, explosions, or other hazards while adhering to international and domestic regulations, including the International Air Transport Association (IATA) Dangerous Goods Regulations (DGR) and 49 CFR (Code of Federal Regulations). Proper packaging must prevent leakage, withstand handling stresses, and clearly communicate hazards through standardized labels and markings. Labeling must be accurate, durable, and placed in accordance with USPS and regulatory specifications to facilitate emergency response and compliance verification.

    Packaging for dangerous goods shipped via USPS must meet UN-certified specifications and be designed to contain the contents under normal and accident conditions. The USPS requires three primary components: inner packaging (primary receptacle), outer packaging (secondary container), and cushioning materials (absorbent and protective layers). Each component must be compatible with the hazard class, quantity, and physical state (solid, liquid, or gas) of the dangerous good.

    USPS-Approved Packaging Standards for Dangerous Goods

    Inner Packaging (Primary Receptacle)
    The inner packaging must be leak-proof, corrosion-resistant, and compatible with the contents. For liquids and gases, containers must comply with UN Performance Oriented Packaging (POP) standards (e.g., UN 1H1, UN 1H2, or UN 1G for glass containers). Common materials include:
  • Plastics: High-density polyethylene (HDPE) or polypropylene (PP) for non-corrosive liquids.
  • Metals: Steel or aluminum for corrosive substances (e.g., acids, oxidizers).
  • Glass: Only permitted for limited quantities (e.g., UN 3H1 for glass bottles) and must be packed in absorbent material (e.g., vermiculite, expanded polystyrene) to prevent breakage.
  • Composite Packaging: For hazardous materials in limited quantities (LQ), such as UN 3AD (plastic bottles with absorbent padding).
  • Key Requirements for Inner Packaging:

  • Must be filled to no more than 95% of capacity for liquids to allow for thermal expansion.
  • Closures (caps, plugs, or seals) must be tamper-evident and secure (e.g., child-resistant for certain chemicals).
  • Leak Testing: Inner packaging must pass a hydrostatic pressure test (1.5× the maximum operating pressure) or a drop test (1.2 meters for liquids, 0.9 meters for solids) if required by the hazard class.
  • Outer Packaging (Secondary Container)
    The outer packaging must be UN-certified, structurally sound, and designed to protect the inner packaging from crushing, puncturing, or leakage. Common outer packaging types include:

  • Fiberboard Boxes: Must meet UN Specification Packaging (SP) standards (e.g., UN 4G for corrugated fiberboard).
  • Plastic Bins: For limited quantities (e.g., UN 3CT for rigid plastic containers).
  • Metal Drums: For large quantities of corrosive or flammable liquids (e.g., UN 1A1 for steel drums).
  • Combination Packaging: Inner container (e.g., glass bottle) + absorbent material + outer box (e.g., UN 3H2 for glass in a box).
  • Key Requirements for Outer Packaging:

  • Structural Integrity: Must withstand a stacking test (12,000 N for small packages, 4,000 N for large) and a drop test (1.2 meters for packages over 5 kg).
  • Absorbent Material: For liquids, the outer packaging must include enough absorbent material to contain the entire contents of the inner packaging (e.g., vermiculite, diatomaceous earth, or cat litter).
  • Ventilation: Required for packages containing flammable liquids or gases to prevent pressure buildup (e.g., UN 1Y1 for vented boxes).
  • Cushioning and Absorbent Materials
    Cushioning materials serve two critical functions:
    1. Protection: Absorb shocks during handling (e.g., bubble wrap, foam, or corrugated dividers).
    2. Leak Containment: Neutralize or absorb spilled hazardous materials (e.g., sodium bicarbonate for acids, activated charcoal for organic liquids).

    USPS-Approved Absorbent Materials:

  • Vermiculite: For corrosive liquids (e.g., acids, bases).
  • Expanded Polystyrene (EPS): For non-corrosive liquids (e.g., solvents, flammable liquids).
  • Diatomaceous Earth: For organic peroxides and certain gases.
  • Cat Litter (Clay-Based): For general liquid containment (must be non-reactive with the substance).
  • Prohibited Materials:

  • Newspaper or loose paper (ignitable).
  • Styrofoam peanuts (not absorbent enough for hazardous liquids).
  • Materials that react with the contents (e.g., sodium bicarbonate with sulfuric acid).
  • USPS Labeling Requirements for Dangerous Goods

    Labeling for dangerous goods shipped via USPS must comply with IATA DGR and 49 CFR while incorporating USPS-specific markings. The labeling system includes:
    1. Hazard Class Labels (Diamonds or rectangular labels).
    2. Shipping Name and UN Number.
    3. Orientation Arrows and Handling Instructions.
    4. Emergency Contact Information.

    Below is a structured breakdown of the labeling requirements, including dimensions, colors, and placement rules.

    Documentation and Shipping Paperwork for USPS Dangerous Goods

    USPS requires rigorous documentation and shipping paperwork to ensure compliance with hazardous materials regulations, particularly under the Hazardous Materials Regulations (HMR) and International Air Transport Association (IATA) Dangerous Goods Regulations (DGR). Proper documentation mitigates risks of non-compliance, accidents, and legal penalties. This section outlines the mandatory forms, completion procedures, and classification standards for USPS dangerous goods shipments, along with internal compliance protocols.

    The USPS enforces strict adherence to 49 CFR Part 172 (HMR) and IATA DGR for air shipments, requiring shippers to provide accurate declarations, technical names, UN numbers, and packing group designations. Certified employees must verify all documentation before submission, ensuring alignment with USPS policies and regulatory requirements.

    Mandatory Documentation for USPS Dangerous Goods Shipments

    All USPS dangerous goods shipments must include the following core documents, which serve as legal proof of compliance and facilitate safe handling:

    - Shipper’s Declaration for Dangerous Goods (SDDG)
    A standardized form (IATA PI 612) required for air shipments, detailing hazardous properties, packaging, and emergency response measures. USPS accepts electronic or printed copies but mandates original signatures for air waybills.

    - USPS Hazardous Materials Shipping Paper
    A USPS-specific form (or equivalent electronic submission) that combines shipment details, hazard classification, and regulatory certifications. This replaces or supplements the SDDG for domestic USPS shipments.

    - Air Waybill (for international shipments)
    Required for air transport under IATA regulations, serving as a contract between the shipper, carrier, and consignee. Must include dangerous goods declarations in Section 18 of the waybill.

    - Packing Instructions (if applicable)
    Some hazardous materials (e.g., lithium batteries) require IATA Packing Instructions (PI 903, PI 965, etc.) to be referenced on shipping documents.

    Where to Obtain Templates:

  • SDDG (IATA PI 612): Available from IATA’s official website or USPS’s Hazardous Materials Compliance Guide.
  • USPS Hazardous Materials Shipping Paper: Provided via USPS.com under "Hazardous Mail" resources or through USPS Certified Provider portals.
  • Air Waybill: Issued by USPS or authorized IATA agents; templates may be requested via USPS’s Dangerous Goods Customer Service.
  • Completing the USPS Hazardous Materials Shipping Paper

    The USPS Hazardous Materials Shipping Paper is a critical document that consolidates shipment details, hazard classifications, and regulatory certifications. Below is a numbered checklist outlining required fields, signatures, and certification statements:
    1. Shipper Information
      • Full legal name and address of the shipper.
      • Contact name, phone, and email for emergency response.
    2. Consignee Information
      • Recipient’s name, address, and contact details.
      • If applicable, specify a dangerous goods contact at the consignee’s location.
    3. Shipment Description
      • Proper Shipping Name (e.g., "Lithium Ion Batteries, Packed with Equipment" for UN3480).
      • Technical Name (if different from the proper shipping name, e.g., "Lithium cobalt oxide").
      • UN Number (e.g., UN1845 for Ethyl Alcohol).
      • Packing Group (I, II, or III, if applicable).
      • Hazard Class (e.g., Class 3 for Flammable Liquids, Class 9 for Miscellaneous Dangerous Goods).
      • Subsidiary Risks (if applicable, e.g., "Corrosive" for UN1760, Ammonium Hydroxide).
      • Quantity (gross weight in pounds/kilograms and net quantity if required).
    4. Packaging Details
      • Packaging Type (e.g., "Overpack," "Combination Packaging," or "Single Packaging").
      • UN Specification Marking (e.g., "1A1" for a UN-certified drum).
      • Maximum Net Quantity Permitted (if applicable).
      • Special Provisions (e.g., "SP 188" for lithium batteries).
    5. Certification Statement
      The shipper certifies that the contents of this consignment are fully and accurately described above; that the provisions of 49 CFR Parts 171-180 and IATA DGR (as applicable) have been complied with in preparing this shipment; and that this shipment does not contain any prohibited articles.
      • Must be signed and dated by a certified employee (see

        Role of Certified Employees

        for details).
      • Electronic signatures are acceptable if compliant with USPS/IATA standards.
    6. Emergency Response Information
      • Phone number for the shipper’s hazardous materials emergency contact (24/7 access required).
      • Reference to IATA’s Emergency Response Guide (ERG) if applicable.
    7. Additional Requirements for Air Shipments
      • IATA Dangerous Goods Declaration (Section 18 of the Air Waybill).
      • Limited Quantity (LTD) or Excepted Quantity (EXC) markings if applicable.
      • Special Handling Instructions (e.g., "Keep Away from Heat" for Class 3 materials).
    Key Notes:
  • Handwritten corrections are prohibited; any changes require a new form.
  • Electronic submissions must be generated via USPS-approved software (e.g., USPS Hazardous Materials eManifest).
  • Missing or incomplete fields may result in shipment rejection or regulatory fines.
  • Classifying and Describing Hazardous Materials on Shipping Documents

    Accurate classification and description of hazardous materials are non-negotiable for USPS compliance. Errors can lead to shipment rejection, fines, or safety incidents. Below are guidelines for proper documentation:

    1. Proper Shipping Name

  • Must match the UN Model Regulations or IATA DGR.
  • Example:
  • Incorrect: "Battery"
  • Correct: "Lithium Ion Batteries, Packed with Equipment" (UN3480).
  • 2. Technical Name

  • Required if the proper shipping name does not fully describe the hazard.
  • Example:
  • For UN1090 (Ammonia, Anhydrous), the technical name may be "Ammonia (NH₃)."
  • 3. UN Number

  • A four-digit identifier assigned by the UN for each hazardous material.
  • Example:
  • UN1845 for Ethyl Alcohol.
  • UN3090 for Environmentally Hazardous Substances, Solid, N.O.S.
  • Where to Find: UN Number Search Tool (IATA).
  • 4. Packing Group (PG)

  • Indicates the degree of hazard (I = High, II = Medium, III = Low).
  • Example:
  • UN1203 (Gasoline) is Packing Group I.
  • UN3257 (Lithium Ion Batteries) is Packing Group II.
  • 5. Hazard Class and Subsidiary Risks

  • Primary Class (e.g., Class 3 for Flammable Liquids).
  • Subsidiary Risks (e.g., "Corrosive" for UN1760, Ammonium Hydroxide).
  • Example:
  • UN1070 (Acetone) is Class 3 (Flammable Liquid) with no subsidiary risks
  • Hazard Classification and Identification for USPS Shipments

    The United States Postal Service (USPS) adheres to a standardized framework for classifying hazardous materials to ensure safe transportation. Proper classification is critical, as it dictates packaging, labeling, documentation, and handling requirements. The USPS recognizes nine hazard classes, each corresponding to distinct physical or chemical properties that pose risks during transit. Understanding these classifications, along with the Packing Group (PG) system and cross-referencing tools like the USPS Hazardous Materials Table, enables shippers to comply with regulatory requirements while mitigating risks of rejection or safety incidents.

    The classification process aligns with the UN Model Regulations for the Transport of Dangerous Goods, ensuring consistency with international standards. Misclassification remains a leading cause of shipment rejections, often due to confusion between similar substances or failure to account for secondary hazards. Below, the nine USPS hazard classes are summarized, along with practical guidance for accurate identification and compliance.

    Nine USPS Hazard Classes and Common Examples

    The USPS hazard classes are derived from the UN Classification System and are structured to reflect the primary risk posed by a material. Each class includes examples of common substances encountered in shipping, though not all materials within a class are permitted for USPS transport. The following table provides an overview:
    Element Specification Placement Rules Examples
    Hazard Class Label
    • Size: Minimum 100 mm × 100 mm (for packages ≤ 30 kg) or proportionally larger for heavier packages.
    • Shape: Square (diamond for IATA, but USPS accepts rectangular labels with equal proportions).
    • Colors: Background white; border red; hazard symbol in black/red (e.g., flame for flammables, skull for poison).
    • Text: Hazard class (e.g., "FLAMMABLE LIQUID") in uppercase, bold, minimum 6 mm height.
    • Must be affixed to the outer packaging on the principal faces (sides most likely to be seen during handling).
    • For multiple hazard classes, use separate labels (e.g., one for flammability, one for corrosivity).
    • Not required for Limited Quantity (LQ) shipments under 5 kg or 5 L, but shipping name and UN number must still be marked.
    • Class 3 (Flammable Liquid): Red diamond with flame symbol.
    • Class 6.1 (Poison): White diamond with skull and crossbones.
    • Class 8 (Corrosive): White diamond with corrosive symbol.
    Shipping Name and UN Number
    • Shipping Name: Must match the proper shipping name from the IATA DGR or 49 CFR Table.
    • UN Number: Four-digit code (e.g., UN 1263 for Acetone).
    • Font: Uppercase, bold, minimum 6 mm height.
    • Location: Must be adjacent to the hazard label or on a contrasting background (e.g., black text on white).
    • For Limited Quantity (LQ), the shipping name and UN number must be printed on the package (not just a label).
    • If space is limited, the UN number may be abbreviated (e.g., "UN1263" → "UN 1263").
    <

    Successfully passing the USPS dangerous goods test hinges on a combination of rigorous classification, meticulous packaging, and flawless documentation—each element serving as a safeguard for personnel, cargo, and compliance. By leveraging standardized tools like the DOT ERG Guide, adhering to UN-certified packaging specifications, and maintaining certified employee oversight, shippers can transform regulatory obligations into operational excellence. This structured approach not only minimizes rejection risks but also reinforces a culture of safety that extends beyond the shipping dock to the final destination. Mastery of these protocols ensures that every dangerous goods shipment meets legal requirements while upholding the highest standards of transport security.

    Class Description Primary Risk Common Examples (Permitted/Restricted) USPS Restrictions
    Class 1Explosives Materials capable of producing sudden, almost instantaneous release of gas and heat, often with destructive effects. Detonation, projection, or blast.
    • Permitted: Fireworks (Class 1.4G), flares (Class 1.4S).
    • Restricted/Prohibited: Dynamite, military explosives, most bulk explosives.
    Limited to Division 1.4 (low hazard) with strict packaging (e.g., UN-approved metal boxes).
    Class 2Gases Compressed, liquefied, or dissolved gases that may be flammable, non-flammable, or poisonous. Asphyxiation, fire, or explosion.
    • Permitted: Carbon dioxide (CO₂, UN 1013), butane (UN 1012), medical oxygen (UN 1072).
    • Restricted: Chlorine (UN 1017, toxic gas), hydrogen (UN 1049, flammable).
    Requires cryogenic packaging for liquefied gases; limited quantities for non-bulk shipments.
    Class 3Flammable Liquids Liquids with a flash point ≤60°C (140°F) that release vapors capable of igniting at ambient temperatures. Fire or explosion.
    • Permitted: Alcohol (UN 1170), acetone (UN 1090), gasoline (UN 1203, restricted).
    • Prohibited: Pure acetone in quantities >450 kg (1,000 lbs).
    Packaging must be UN-certified (e.g., UN 1H1 or 1H2); limited to Packing Groups I–III.
    Class 4Flammable Solids, Substances Liable to Spontaneous Combustion, and Substances Which, in Contact with Water, Emit Flammable Gases Solids that ignite readily, self-heat, or react violently with water to produce flammable gases. Fire or toxic gas release.
    • Permitted: Magnesium powder (UN 1418), phosphorus (UN 1381, self-heating).
    • Restricted: Sodium (UN 1428, water-reactive).
    Requires moisture-resistant packaging (e.g., UN 4G for water-reactive substances).
    Class 5Oxidizing Substances and Organic Peroxides Materials that may cause or contribute to combustion of other materials, or undergo exothermic decomposition. Fire or explosion upon contact with combustibles.
    • Permitted: Potassium permanganate (UN 1490), hydrogen peroxide (UN 2014, >6% but ≤20%).
    • Prohibited: Organic peroxides with a temperature of no-fire point <40°C (e.g., UN 3102).
    Packing Group I (most hazardous) requires UN-approved packaging; organic peroxides have additional temperature controls.
    Class 6Toxic and Infectious Substances Materials that are poisonous to humans or animals, or contain pathogens capable of causing disease. Acute or chronic health effects, infection.
    • Permitted: Sodium cyanide (UN 1696, toxic), diagnostic specimens (UN 3373, infectious).
    • Restricted: Arsenic compounds (UN 1558), most biological agents.
    Toxic substances require Packing Group I–III; infectious substances must comply with IATA PI 650 for Category A/B.
    Class 7Radioactive Materials Materials containing radionuclides that emit ionizing radiation. Radiation exposure, contamination.
    • Permitted: Low-specific-activity (LSA) materials (e.g., UN 2910), excepted packages (e.g., UN 2911).
    • Prohibited: High-level radioactive waste, most medical isotopes.
    Requires DOT 49 CFR Part 173 compliance; limited to Special Form or Industrial packages.
    Class 8Corrosive Substances Liquids or solids that cause severe damage to living tissue or corrode metals. Chemical burns, equipment damage.
    • Permitted: Sulfuric acid (UN 1830), sodium hydroxide (UN 1824).
    • Restricted: Hydrofluoric acid (UN 1790, >50%).
    Packaging must be UN-certified (e.g., UN 2A or 2B); Packing Group I is most hazardous.
    Class 9Miscellaneous Dangerous Goods