how to use riveting tool effectively in industrial applications

Published

how to use riveting tool
Table of Contents

Riveting tools serve as the backbone of modern assembly processes, enabling permanent and high-strength joints across industries from aerospace to automotive manufacturing. Understanding their mechanical principles—compression, shear, and controlled deformation—is essential for achieving flawless fasteners that withstand extreme conditions. This guide explores the core functions of riveting tools, from manual hand guns to precision hydraulic systems, while addressing material-specific techniques, safety protocols, and advanced applications for specialized environments.

The efficiency of a riveted joint hinges on precise tool selection, surface preparation, and operational consistency. Whether working with aluminum aircraft skins, steel automotive frames, or composite structures, each material demands tailored rivet types, pre-treatment methods, and tool adjustments to prevent defects like buttoning or over-clinching. Additionally, adherence to rigorous safety measures—including PPE, maintenance routines, and environmental controls—ensures both operator protection and tool longevity. Advanced techniques, such as blind riveting for hard-to-reach areas or rivet setting for aerospace tolerances, further expand the versatility of these tools in high-pressure industries.

how to use riveting tool

Mechanical Principles Underlying Riveting Tools: Force Dynamics and Joint Integrity

Riveting tools operate on fundamental mechanical principles—compression, shear, and controlled deformation—to create permanent fasteners without threading or welding. These forces ensure structural integrity by plastically deforming the rivet shank while maintaining precise alignment between joined materials. Compression forces clamp the workpiece, shear forces sever excess rivet material, and deformation (cold or hot forming) creates a secure head. The interplay of these forces dictates the tool’s efficiency, durability, and suitability for specific applications, from lightweight aerospace alloys to heavy-duty steel construction.

The riveting process leverages material science and stress distribution to achieve a joint stronger than the base material in many cases. For example, in aluminum aircraft structures, rivets undergo hoop stress during deformation, forming a bulbed shank that resists tensile and shear loads. The clamp force applied by the tool must exceed the material’s yield strength to prevent slippage, while the deformation ratio (head diameter to shank diameter) determines the joint’s load-bearing capacity. Below is a technical breakdown of the force interactions and their role in rivet formation.

Compression and Clamp Force Mechanics

Compression forces in riveting serve two critical functions: securing the workpiece and aligning the rivet shank before deformation. The clamp force—applied by the tool’s anvil and nosepiece—must be sufficient to prevent material separation during rivet setting. For structural applications, clamp forces typically range between 500–5,000 lbs (2.2–22.2 kN), depending on the rivet material and thickness of the joined plates.
Clamp Force Formula (Simplified):
\[ F_c = \sigma_y \times A \]
Where:
  • \( F_c \) = Required clamp force (lbf or N)
  • \( \sigma_y \) = Yield strength of the weaker material (psi or MPa)
  • \( A \) = Contact area between rivet shank and workpiece (in² or mm²)
  • For instance, a 2024-T3 aluminum alloy (yield strength: ~35,000 psi) with a 3/16" (4.8 mm) rivet shank requires a minimum clamp force of ~1,200 lbs (5.3 kN) to prevent slippage. Overcompression risks material thinning or cracking, while undercompression leads to loose joints. Riveting tools incorporate adjustable pressure settings to accommodate varying materials, with pneumatic and hydraulic tools offering finer control than manual alternatives.

    Shear Forces and Rivet Severing

    Shear forces in riveting are applied to sever excess rivet material (the "tail") after deformation, ensuring a clean break and preventing sharp edges. The shear strength of the rivet material must exceed the tensile strength of the joined materials to avoid premature failure. Common rivet alloys (e.g., 2117-T3 aluminum, 2017-T4 aluminum, or 7075-T6 aluminum) are selected based on their shear-to-tensile ratios, which typically range from 0.6 to 0.8.
    Shear Strength Considerations:
  • Aluminum rivets: Shear strength ≈ 60–70% of tensile strength.
  • Steel rivets: Shear strength ≈ 50–60% of tensile strength (due to higher ductility requirements).
  • Copper/monels: Shear strength ≈ 55–65% of tensile strength.
  • The shear plane in riveting occurs at the rivet head-to-shank junction, where the tool’s nosepiece applies a cutting force perpendicular to the shank. High-speed pneumatic and hydraulic tools achieve shear in milliseconds, minimizing heat generation in heat-sensitive materials (e.g., composites or treated alloys). Manual rivet guns rely on mechanical leverage to generate shear, but their force consistency varies with operator technique.

    Deformation Forces and Joint Formation

    Deformation in riveting transforms the rivet shank into a bulbed or mushroom-shaped head through controlled plastic deformation. The deformation ratio (head diameter to shank diameter) is critical: an optimal ratio ensures maximum bearing area while avoiding excessive material thinning. For structural rivets, the deformation ratio typically falls between 1.5:1 and 2.5:1, depending on the application.
    Deformation Ratio Guidelines:
    ApplicationRecommended RatioExample Rivet
    Aerospace (Aluminum)1.8:1 – 2.2:1MS20470 (3/32" shank)
    Automotive (Steel)2.0:1 – 2.5:11018 Cold-Rolled Steel
    Construction (Heavy)1.5:1 – 1.8:1ASTM F1852 (Structural)
    DIY (Soft Metals)1.2:1 – 1.5:1Copper or Brass Rivets
    The deformation force (\( F_d \)) required is calculated based on the material’s flow stress (\( \sigma_f \)) and the deformed volume:
    \[ F_d = \sigma_f \times V \]
    Where:
  • \( V \) = Volume of deformed material (shank cross-section × deformation length).
  • For example, setting a 3/32" (2.4 mm) aluminum rivet with a 1.8:1 ratio requires ~800–1,200 lbs (3.6–5.3 kN) of deformation force. Hydraulic riveting tools excel in high-force applications (e.g., aerospace or shipbuilding), while electric tools offer programmable deformation cycles for repeatability in automotive manufacturing.

    Step-by-Step Riveting Procedures for Different Materials

    Riveting is a precision process requiring material-specific adaptations to ensure structural integrity and durability. Aluminum, steel, and composite materials each demand distinct surface treatments, rivet selections, and tool adjustments to mitigate defects such as delamination, cracking, or joint failure. This section provides a structured methodology for manual and semi-automated riveting, emphasizing proper technique to achieve consistent, high-quality joints.

    Surface Preparation and Rivet Selection Criteria

    Surface preparation directly influences rivet grip strength and corrosion resistance. Contaminants, oxides, or rough edges compromise mechanical interlocking and tool performance. Below is a comparative table outlining material-specific recommendations:
    Material Type Recommended Rivet Material Pre-Rivet Surface Treatment Tool Setting Parameters
    Aluminum Alloys (e.g., 2024-T3, 6061-T6) Aluminum (2117-T4, 2017-T4) or Monel rivets for corrosion resistance
    • Mechanical cleaning: Wire brushing or abrasive blasting to remove oxide layers (Al2O3).
    • Chemical treatment: Alodine (chromate conversion coating) or anodizing for corrosion protection.
    • Deburring: File or ream holes to 0.002–0.005" tolerance to prevent galling.
    • Manual riveting: 1500–2500 psi clamping pressure; 60–80% of rivet shank diameter upset.
    • Hot riveting (for large diameters): 800–900°F (427–482°C) for aluminum rivets; quench in water immediately post-upset.
    • Pneumatic tools: 200–300 ft-lb torque for 3/32"–1/4" rivets.
    Carbon Steel (e.g., A36, 1018) Steel (1018, 1020) or stainless steel (304, 316) for high-stress applications
    • Cleaning: Solvent wipe (acetone or MEK) to remove oils/grease; sandblasting for rusted surfaces.
    • Phosphating or zinc plating to prevent corrosion.
    • Deburring: Use a 120–180 grit file to chamfer edges and remove burrs.
    • Manual riveting: 3000–5000 psi clamping force; 70–90% upset ratio.
    • Hot riveting: 1200–1500°F (649–816°C) for steel rivets; avoid overheating to prevent decarburization.
    • Impact wrench settings: 350–500 ft-lb for 3/16"–5/16" rivets.
    Composite Materials (e.g., Carbon Fiber Reinforced Polymer - CFRP) Titanium (Grade 2) or aluminum alloy (7075-T6) with interference fit (0.002–0.005" oversize)
    • Cleaning: Acetone or isopropyl alcohol (99%) wipe; avoid abrasives to prevent fiber damage.
    • Surface treatment: Plasma or corona treatment to improve adhesive bonding for hybrid rivet-composite joints.
    • Hole preparation: Step reaming to ±0.001" tolerance; countersink at 82° for flush rivets.
    • Manual riveting: 500–1200 psi clamping pressure; 40–60% upset to avoid delamination.
    • Ultrasonic riveting: 20 kHz frequency with 100–300 W power for titanium rivets.
    • Tooling: Use low-drag dies to prevent fiber crushing.
    Note: For hybrid joints (e.g., aluminum-composite), use bimetallic or interference-fit rivets to distribute clamping forces evenly.

    Hand Positioning and Pressure Application Techniques

    Improper hand placement during manual riveting leads to defects such as buttoning (incomplete upset) or over-clinching (excessive deformation). The following guidelines ensure controlled deformation:

    1. Grip and Alignment

  • Hold the rivet gun with a firm but relaxed grip, positioning the thumb over the trigger to apply steady pressure.
  • Align the bucking bar perpendicular to the rivet shank to prevent lateral forces that cause misalignment.
  • For blind rivets, ensure the mandrel is fully seated before pulling; apply axial pressure only to avoid bending.
  • 2. Pressure Application Phases

  • Initial Clamping: Apply 20–30% of maximum pressure to seat the rivet head flush against the material.
  • Upset Phase: Gradually increase pressure until the shank collapses to the specified diameter. Monitor for uniform deformation around the circumference.
  • Final Hold: Maintain pressure for 3–5 seconds to allow material relaxation and prevent spring-back.
  • 3. Defect Prevention Checkpoints

  • Buttoning: Indicates insufficient pressure or premature release. Solution: Increase clamping force incrementally and verify rivet length.
  • Over-Clinching: Causes head distortion or substrate cracking. Solution: Use a rivet length gauge and adjust upset distance.
  • Lateral Offset: Results from misaligned holes or tool slippage. Solution: Pre-drill pilot holes with a jig or template.
  • Visual Aid for Hand Positioning:

  • Dominant Hand: Supports the rivet gun near the handle for stability.
  • Non-Dominant Hand: Positions the bucking bar or anvil, applying counter-pressure to the opposite side of the joint.
  • Angle: Maintain a 45° angle between the gun and the workpiece to distribute force evenly.
  • Critical Mistakes During Riveting and Their Visual Indicators

    Errors in riveting compromise joint integrity and may lead to catastrophic failure. The following list highlights common pitfalls and their identifiable symptoms:
    • Misaligned Holes
      • Visual Indicator: Rivet head or mandrel protruding at an angle; gaps between faying surfaces.
      • Cause

        how to use riveting tool - Ilustrasi 2

        Safety Protocols and Tool Maintenance for Riveting Operations

        Riveting operations, while essential for achieving durable mechanical joints, pose inherent risks to operators and equipment if proper safety measures and maintenance protocols are overlooked. Personal protective equipment (PPE) mitigates exposure to hazards such as flying debris, noise, and toxic fumes, while systematic tool maintenance ensures operational consistency and extends service life. The following sections outline critical safety requirements, structured maintenance routines, and cost-benefit analyses for tool components, alongside best practices for tool storage to preserve functionality and prevent damage.

        Personal Protective Equipment (PPE) Requirements for Riveting Operations

        PPE selection must align with the specific hazards associated with riveting, including projectile debris, high-decibel noise, and inhalation of particulate matter. Eye protection is mandatory due to the risk of high-speed rivet shavings or broken mandrels; ANSI Z87.1-rated safety goggles or face shields with side shields provide optimal coverage. Hearing protection is critical in environments exceeding 85 dB, as prolonged exposure to pneumatic tool noise (often 90–110 dB) can cause irreversible hearing damage. Earplugs rated NRR 25–33 or earmuffs with noise reduction ratings (NRR) of 25 dB or higher are recommended.

        For hand protection, cut-resistant gloves (e.g., ANSI A3/A4-rated) prevent lacerations from sharp rivet edges or tool components, while vibration-dampening gloves reduce hand-arm vibration syndrome (HAVS) risks from prolonged tool use. Respiratory protection is essential when working with coated rivets (e.g., zinc, cadmium) or in confined spaces where fumes may accumulate. NIOSH-approved respirators with organic vapor cartridges (e.g., 3M 6000 series) or particulate filters (e.g., N95 for dust) should be used, with full-facepiece respirators preferred for high-exposure scenarios. Foot protection with steel-toe or composite-toe boots shields against dropped tools or heavy rivet buckets, while high-visibility clothing ensures operator safety in shared workspaces.

        Critical PPE Compliance Note:
        OSHA 29 CFR 1910.132 mandates PPE use where hazards exist; employers must provide training on proper fit, maintenance, and limitations of each PPE type.

        Daily and Weekly Maintenance Checklists for Pneumatic Riveting Tools

        Pneumatic riveting tools require rigorous maintenance to prevent malfunctions, ensure precision, and avoid costly downtime. Daily inspections focus on operational readiness, while weekly or monthly tasks address wear and lubrication. Below are structured checklists with contextual importance:

        ### Daily Maintenance Routine
        Pneumatic tools are subject to rapid wear from high-cycle operations, making daily checks essential for identifying immediate risks. Operators should:

      • Inspect air hoses and fittings for leaks or cracks, as compressed air loss reduces tool efficiency and increases noise. Use a soapy water solution to detect leaks at connections.
      • Verify mandrel/die alignment by test-firing the tool into a scrap material; misalignment indicates worn bushings or anvil faces, which compromise joint integrity.
      • Clear debris from tool vents and air filters, as blockages restrict airflow and cause overheating. Use a compressed air blow-off tool for vents and replace clogged filters per manufacturer guidelines.
      • Check for unusual vibrations or noises, which may signal internal component failure (e.g., worn pistons or seals). Document anomalies for further investigation.
      • ### Weekly Maintenance Routine
        Weekly tasks extend tool lifespan by addressing wear and lubrication. Key procedures include:

      • Lubricate moving parts using manufacturer-approved grease (e.g., Mobilux EP0 or equivalent) at specified points: piston rods, cylinder walls, and trigger mechanisms. Over-lubrication can attract debris, so follow torque specifications.
      • Replace air filters if visibly contaminated, as dirty filters reduce airflow by up to 30%, leading to inconsistent rivet setting. Use filters rated for the tool’s CFM (cubic feet per minute) capacity.
      • Inspect anvil faces and dies for chipping or deformation. A chipped anvil face can cause incomplete rivet heads, while worn dies may strip rivet shanks. Replace components if surface irregularities exceed 0.005 inches (0.127 mm).
      • Test trigger response by ensuring smooth engagement with minimal free play. Stiff triggers may indicate worn seals or accumulated debris in the valve assembly.
      • Maintenance Cost Impact:
        Neglecting weekly lubrication can increase tool wear rates by 40%, while filter replacements cost $10–$30 per tool annually—far less than repairing a seized cylinder ($500+).

        Disposable vs. Reusable Riveting Tool Components: Lifespan and Cost-Effectiveness

        The choice between disposable (e.g., single-use mandrels, dies) and reusable components (e.g., hardened steel dies, interchangeable anvil faces) depends on project volume, material type, and budget constraints. Below is a comparative analysis of mandrels/dies and anvil faces, with cost-effectiveness evaluated for high-volume (e.g., aerospace, automotive) and low-volume (e.g., construction, repair) applications.

        ### Mandrels and Dies

        ComponentDisposable (Single-Use)Reusable (Multi-Use)Cost-Effectiveness Threshold
        MaterialAluminum, soft steelTool steel (A2, D2), carbide-coated
        Lifespan1–50 cycles (material-dependent)5,000–50,000 cycles (with maintenance)
        Cost per Unit$0.10–$2.50 (bulk discounts reduce price)$50–$300 (initial investment)
        High-Volume UseNot viable; high labor cost for frequent changesPreferred; amortized cost < $0.01 per rivet>1,000 rivets/year
        Low-Volume UseCost-effective for <500 rivets/yearOverkill; storage/logistics add complexity<200 rivets/year
        Material SuitabilityIdeal for soft metals (aluminum, brass)Required for hard metals (titanium, stainless)
        Example: In aerospace applications, reusable carbide-coated dies reduce per-rivet costs by 80% over disposable mandrels for titanium rivets, despite a $250 initial cost. Conversely, a construction crew using 300 aluminum rivets annually saves $1,200 by opting for disposable mandrels ($1.50 each) over reusable dies ($200 each with 500-cycle lifespan).

        ### Anvil Faces and Bushings
        Reusable anvil faces (e.g., chromium-plated steel) outlast disposable versions by 100x but require precision machining if damaged. Chipped anvils reduce rivet shear strength by up to 30%, justifying their reuse in high-volume settings. For low-volume work, disposable anvil inserts (e.g., for hand-held riveters) cost $2–$5 each but eliminate rework risks.

        Economic Formula for Component Selection:
        \[
        \text{Break-even Point (rivets)} = \frac{\text{Reusable Component Cost}}{\text{Disposable Cost per Rivet}}
        \]
        Example: A $150 reusable die used for $1 rivets breaks even at 150 rivets; beyond this, reusable components yield savings.

        Tool Storage Best Practices to Preserve Functionality

        Improper storage accelerates corrosion, misalignment, and mechanical failure in riveting tools. A structured storage system addresses humidity control, tool organization, and material segregation to maintain precision and longevity. Below are descriptive guidelines for an optimized storage environment:

        ### Humidity and Environmental Control
        Riveting tools, particularly pneumatic components, are vulnerable to rust and seal degradation in humid conditions. Storage areas should maintain:

      • Relative humidity below 40% via dehumidifiers or silica gel packs, especially in coastal or high-moisture environments.
      • Temperature stability between 10°C and 30°C to prevent condensation on tool surfaces. Avoid basements or unheated warehouses.
      • Corrosion inhibitors (e.g., WD-40 Specialist or Boeshield T-9) applied to steel components before storage, with reapplication every 6 months.
      • ### Tool Rack Organization
        Tools should be stored in dedicated racks with labeled slots to prevent cross-contamination and damage:

      • Pneumatic tools mounted vertically on pegboards with hoses coiled and secured to avoid kinking.
      • Advanced Techniques in Specialized Riveting for High-Pressure or Precision Work

        Precision riveting in high-stress or inaccessible applications demands specialized methods to ensure structural integrity, repeatability, and compliance with industry standards. Blind riveting, rivet setters for aerospace assemblies, and repair techniques for over-riveted joints address critical challenges in sectors such as aviation, automotive, and infrastructure. These methods optimize material performance while mitigating risks associated with manual variability or environmental constraints.

        Blind Riveting for Hard-to-Reach Applications

        Blind riveting enables secure fastening in locations where access to both sides of the joint is limited, such as aircraft fuselages, ceiling voids, or pipeline connections. The process relies on pull-through or pop rivets, which are installed using pneumatic, electric, or manual tools designed to apply consistent clamping force. For ceilings or pipelines, lightweight, ergonomic tools with extended handles or magnetic bases improve operator control. In aerospace, specialized pull-through rivets (e.g., CherryMAX® or Olympus®) feature mandrel break-off systems to prevent protrusion into critical assemblies.

        Tool Selection Criteria for Blind Riveting:

      • Accessibility: Tools with swivel heads or flexible shafts accommodate tight spaces (e.g., Jorgensen® PopRiv® for 90° angles).
      • Material Compatibility: Aluminum, steel, or titanium rivets must match the substrate to prevent galvanic corrosion (e.g., AN470AD for aluminum skins).
      • Load Requirements: High-pressure applications (e.g., hydraulic systems) require shear-strength-rated rivets (e.g., MS20470AD4-4 with 3,000 lbf minimum shear strength).
      • Environmental Resistance: Rivets with corrosion-resistant coatings (e.g., Cadmium-plated AN430) are used in marine or outdoor infrastructure.
      • Procedure for Blind Rivet Installation:
        1. Surface Preparation: Clean the joint with aluminum oxide abrasive (SAE 1200 grit) to remove contaminants and ensure mechanical bonding.
        2. Alignment: Position the rivet through the pre-drilled hole (diameter tolerance: ±0.002 inches) using a rivet guide bushing to prevent misalignment.
        3. Tool Application: Activate the rivet gun to draw the mandrel until the break-off point is reached (verified via mandrel protrusion gauge).
        4. Inspection: Verify head height using a go/no-go gauge (e.g., ±0.005 inches for aerospace standards) and check for countersink fill (if applicable).

        Note: Over-tensioning blind rivets can cause mandrel shear failure or substrate cracking; under-tensioning results in loose joints. Use torque-limited tools for critical applications.

        Structural Rivet Comparison Table: Shear Strength, Head Styles, and Applications

        The selection of structural rivets depends on shear load requirements, head design, and industry-specific standards. Below is a comparative analysis of common rivets used in aerospace and automotive applications:
        Rivet Designation Shear Strength (Minimum, lbf) Head Style Material Primary Applications Industry Standard
        MS20470AD4-4 3,000 100° countersunk (flat or universal) 2117-T4 aluminum alloy Aircraft skins, control surfaces, lightweight structures MIL-SPEC (Aerospace)
        AN470AD 2,200 100° countersunk 2024-T4 aluminum alloy General aviation, non-critical fuselage panels AN Specification (Aerospace)
        AN430AD 1,500 100° countersunk (cadmium-plated) 1100 aluminum alloy Automotive body panels, marine structures AN Specification (General Use)
        MS20426AD6-6 4,500 Universal (protruding or flush) 2024-T4 aluminum alloy High-load aircraft frames, landing gear attachments MIL-SPEC (Aerospace)
        AN426AD 3,500 Universal (protruding) 2117-T4 aluminum alloy Automotive chassis, heavy-duty assemblies AN Specification (Industrial)
        Key Considerations:
      • Shear Strength: Rivets for aerospace (e.g., MS20470) exceed automotive counterparts (e.g., AN430) by 50–100% due to dynamic load requirements.
      • Head Style: Countersunk rivets minimize aerodynamic drag in aircraft, while universal (protruding) rivets are used in automotive for ease of installation.
      • Material: 2117-T4 and 2024-T4 aluminum alloys offer superior fatigue resistance for cyclic loading (e.g., aircraft wings).
      • Corrosion Resistance: Cadmium-plated rivets (e.g., AN430) are phased out in aerospace due to toxicity but remain common in marine and automotive applications.
      • Using Rivet Setters for Consistent Head Heights in Aerospace Assemblies

        Aerospace assemblies require tight tolerances (±0.005 inches) for rivet head heights to ensure aerodynamic smoothness and fatigue resistance. Rivet setters automate this process by applying controlled pressure via hydraulic or pneumatic actuators. Below is the calibration and operational procedure:

        Calibration Steps:
        1. Tool Selection: Use a hydraulic rivet setter (e.g., Jorgensen® 500 Series) for high-volume production or a manual rivet bucking bar for field repairs.
        2. Pressure Setting: Adjust the hydraulic pressure gauge to match the rivet manufacturer’s specifications (e.g., 1,500–2,500 psi for MS20470).
        3. Anvil Alignment: Ensure the bucking bar anvil is perpendicular to the rivet shank using a digital angle finder (tolerance: ±0.5°).
        4. Gauge Verification: Install a master rivet (pre-calibrated to ±0.002 inches) and measure the head height with a micrometer or laser gauge.

        Operational Procedure:
        1. Rivet Insertion: Place the rivet through the pre-drilled hole (diameter: hole size = rivet shank diameter + 0.002 inches).
        2. Tool Engagement: Activate the rivet setter to clamp the rivet head while the bucking bar applies axial load to the opposite side.
        3. Pressure Application: Maintain constant pressure until the mandrel breaks off (for solid rivets) or the head reaches specification.
        4. Inspection: Verify head height using a go/no-go gauge and document measurements per NASA-STD-4002 or AMS-4260 standards.

        Critical Tolerances:

      • Head Height Variation: Exceeding ±0.005 inches may cause stress concentrations or aerodynamic disruption.
      • Bucking Bar Slippage: Misalignment > 1° can lead to asymmetrical rivet deformation, reducing shear strength by up to 30%.
      • Over-Riveting: Applying >105% of specified load risks substrate cracking in 7075-T

        Mastering riveting tools transcends basic operation; it requires a blend of technical precision, material science knowledge, and adherence to industry standards. By selecting the appropriate tool for the application, meticulously preparing surfaces, and implementing structured maintenance protocols, professionals can achieve durable, defect-free joints that meet critical performance demands. Whether in a controlled workshop or a high-stakes aerospace assembly line, the principles outlined here provide a roadmap for efficiency, safety, and long-term reliability in riveting operations. The key lies in balancing innovation with foundational techniques, ensuring every riveted connection is both functional and future-proof.

      • Leave a Comment

        Comments are moderated before appearing. The data you submit is processed according to the Privacy Policy of www.linuxunplugged.com.