How To Tune A Piano Yourself Basic Guide Essentials Techniques

Table of Contents
- Understanding Piano Tuning Basics
- Fundamental Principles of Piano Tuning
- The Octave and Mathematical Relationships in Piano Tuning
- Equal Temperament vs. Just Intonation in Piano Tuning
- Identifying the A440 Reference Note and Its Role in Tuning
- Essential Tools and Preparation for Piano Tuning
- Required Tools for Basic Piano Tuning
- Preparation Steps for Piano Tuning
- Comparison of Electronic and Strobe Tuners
- Step-by-Step Tuning Procedure for Manual Piano Adjustment
- Starting with the Middle Octave (C4 to C5)
- Adjusting String Tension with the Tuning Hammer
- Tuning the Bass Strings (C2 to C3)
- Tuning the Treble Strings (C5 to C8)
- Common Beginner Mistakes and Corrective Measures
- Advanced Techniques and Troubleshooting in Piano Tuning
- Tuning Without Electronic Aids: Reference Pitch and Ear Training
- Diagnosing and Correcting Common Tuning Issues
- Adjusting for Extreme Temperatures and Disuse
- Stroboscopic Tuning: Visualizing String Vibrations
- Maintenance and Long-Term Care for a Tuned Piano
- Regular Inspections for Tuning Stability
- Care and Maintenance of Tuning Tools
- Recommended Tuning Frequency Based on Usage and Environment
- Procedures for Storing a Piano in Non-Optimal Conditions
- Practical Examples and Common Scenarios in Piano Tuning
- Tuning a Piano in Different Environments
- Tuning a Piano with a Broken or Missing String
- Tuning a Piano After Transportation or Moving
Mastering the art of piano tuning transforms a basic instrument into a precision instrument capable of delivering harmonious performances. This guide provides a structured approach to tuning a piano yourself, covering foundational principles, essential tools, and systematic techniques to achieve accurate pitch alignment. Whether you are a musician seeking self-sufficiency or a hobbyist aiming to refine skills, understanding the science behind tuning—from harmonic relationships to equal temperament—ensures a reliable starting point. By addressing preparation, step-by-step procedures, and troubleshooting, this resource equips you with the knowledge to maintain your piano’s integrity between professional servicings.
The process begins with grasping the mathematical and acoustic foundations of tuning, where concepts like the octave’s 2:1 frequency ratio and the role of string tension dictate precision. Equipped with the right tools—such as tuning hammers, electronic tuners, and strobe tuners—you can systematically adjust each string while mitigating common pitfalls like overtightening or neglecting environmental factors. Real-world scenarios, from adapting techniques for different settings to handling structural issues, further solidify practical expertise. Through consistent maintenance and care, your piano will not only sound its best but also endure as a long-term investment in musical craftsmanship.

Understanding Piano Tuning Basics
Piano tuning is a precise science that balances physics, acoustics, and mathematics to achieve harmonious sound. At its core, tuning adjusts string tension to align pitches with standardized intervals, ensuring musical consistency across all keys. The process relies on fundamental principles such as harmonic relationships, string vibration frequencies, and acoustic resonance, where even minor deviations can disrupt tonal purity. Mastering these concepts allows tuners to systematically correct pitch discrepancies, from the lowest bass strings to the highest treble notes, while maintaining structural integrity.
The mathematical foundation of piano tuning stems from the octave, a fundamental musical interval where a note’s frequency doubles (e.g., A3 at 220 Hz and A4 at 440 Hz share a 2:1 ratio). This relationship ensures that octaves sound inherently stable, serving as anchor points for tuning other intervals. However, intermediate notes require adjustments to reconcile just intonation (pure harmonic ratios) with equal temperament (a compromise system dividing the octave into 12 equal semitones). The piano’s design mandates equal temperament to accommodate all keys equally, though this sacrifices some harmonic purity compared to just intonation.
Fundamental Principles of Piano Tuning
Piano tuning operates on three interdependent principles:1. String Tension and Pitch: The frequency of a vibrating string is determined by its length, mass, and tension, governed by the formula:
\( f = \frac{1}{2L} \sqrt{\frac{T}{\mu}} \)Increasing tension raises pitch, while loosening it lowers it. Tuners manipulate tension via the pin system, where slight rotations adjust string length and thus pitch.
Where:
\( f \) = frequency (pitch), \( L \) = string length, \( T \) = tension, \( \mu \) = linear mass density (mass per unit length).
2. Harmonic Relationships: Notes are tuned in relation to one another using harmonic series (overtones) and interval ratios. For example, the perfect fifth (3:2 ratio) between C and G is naturally stable, while the major third (5:4 ratio) requires precise tuning to avoid dissonance. The piano’s stretched octaves (slightly widened intervals in the upper register) compensate for the inharmonicity of higher strings, where overtones deviate from pure harmonic behavior.
3. Acoustic Resonance: The piano’s soundboard amplifies string vibrations, but its stiffness affects pitch. Tuning must account for string stiffness (thickness and material) and soundboard response, which can cause strings to "go out of tune" over time due to environmental factors like humidity or temperature.
The Octave and Mathematical Relationships in Piano Tuning
The octave is the bedrock of piano tuning, defined by a 2:1 frequency ratio between consecutive notes (e.g., C4 at 261.63 Hz and C5 at 523.25 Hz). This ratio ensures perceptual consistency: doubling frequency produces the same note name but an octave higher. The piano’s 88 keys span nearly 7 octaves, from A0 (27.5 Hz) to C8 (4186 Hz), requiring precise calibration to maintain uniformity across the entire range.To divide the octave into 12 semitones (equal temperament), each semitone represents a frequency ratio of \( 2^{1/12} \) ≈ 1.05946 (approximately 6 cents). This mathematical equality allows the piano to modulate seamlessly between keys, though it introduces slight deviations from just intonation. For instance:
Tuners use the octave as a reference to verify pitch accuracy. For example, if A4 (440 Hz) is correct, A5 should measure 880 Hz, and A3 should measure 220 Hz. Deviations beyond ±1 cent (0.5 Hz at A4) become perceptible to trained ears.
Equal Temperament vs. Just Intonation in Piano Tuning
The choice between equal temperament and just intonation fundamentally shapes a piano’s sound and functionality.Equal Temperament:
Divides the octave into 12 equal semitones (100 cents each). Enables key flexibility: any key can be played with consistent intervals, though some chords (e.g., major thirds) sound slightly impure. Standard for pianos due to its universal applicability in Western music, where modulation between keys is essential. Mathematical basis: \( 2^{1/12} \) ratio per semitone.
Just Intonation:Pianos adopt equal temperament because:
Uses pure harmonic ratios (e.g., 3:2 for fifths, 5:4 for major thirds) for "perfect" consonance. Ideal for fixed-pitch instruments like organs or harpsichords in specific keys, but impractical for pianos requiring multi-key functionality. Example: A just major third (C-E) at 5:4 ≈ 386.31 cents sounds sweeter than the equal-tempered 400 cents. Limitation: Only one key sounds "in tune" at a time; other keys produce dissonant intervals.
Identifying the A440 Reference Note and Its Role in Tuning
The A440 reference note (A above middle C at 440 Hz) serves as the global tuning standard for orchestras, broadcast media, and pianos. Established by the International Organization for Standardization (ISO 16) in 1955, A440 ensures consistency across instruments and recordings. However, historical standards varied:To identify A440:
1. Electronic Tuners: Digital tuners with a microphone input display frequency in real time. Place the tuner near the A4 string (4th string from the right in the treble section) and strike the note lightly.
2. Acoustic Verification: Compare A4 to a reference pitch (e.g., a tuning fork vibrating at 440 Hz). The piano’s A4 should match the fork’s frequency when both are struck simultaneously.
3. Harmonic Check: Play the 12th harmonic of A2 (A4) by lightly touching the A2 string near the bridge while plucking it. This harmonic should align with A440 if the piano is in tune.
Why A440 is Critical:
For pianos, tuners often begin with the unison C (middle C) and work outward, using A440 as a midpoint verification. Modern tuners may also use stroboscopic tuners or laser-based systems for higher precision, but A440 remains the foundational reference.

Essential Tools and Preparation for Piano Tuning
Proper piano tuning requires precision, the right tools, and meticulous preparation to ensure accurate results and prolong the instrument’s lifespan. Selecting appropriate equipment and conducting pre-tuning inspections are critical steps that influence tuning efficiency and the piano’s long-term stability. Below are the essential tools, preparation steps, and a comparative analysis of tuning devices to guide a structured approach.Required Tools for Basic Piano Tuning
A well-equipped tuner relies on specialized tools to measure pitch, adjust strings, and assess the instrument’s condition. The following tools are indispensable for basic tuning, each serving a distinct purpose in the process.-
Tuning Hammers (Leather or Felt)
Tuning hammers are used to gently strike strings to produce a clear, sustained tone for pitch comparison. Leather hammers are preferred for their durability and ability to minimize string damage, while felt hammers offer a softer touch, ideal for delicate adjustments.
- Materials: High-quality leather or felt, typically mounted on a wooden or rubber handle.
- Variations: Some hammers include built-in tuning forks or electronic contacts for strobe tuners.
- Maintenance: Clean regularly to remove rosin buildup, which can dull the hammer’s effectiveness.
-
Tuning Wrenches (Pliers)
Tuning wrenches are designed to turn tuning pins with minimal torque, preventing damage to the pin or the pinblock. Ergonomic designs reduce hand fatigue during prolonged tuning sessions.
- Types:
- Straight Wrenches: Suitable for most pins but may require adjustment for tight spaces.
- Bent Wrenches: Designed for hard-to-reach pins, such as those in the bass section.
- Adjustable Wrenches: Accommodate varying pin sizes and shapes.
- Grip and Leverage: Look for wrenches with soft grips and extended handles to maximize control and reduce slippage.
- Precision: High-quality wrenches feature fine-toothed jaws to grip pins securely without rounding them.
- Types:
-
Electronic Tuners
Electronic tuners provide real-time pitch readings, typically via a digital display or LED indicators. They are portable, user-friendly, and suitable for beginners, though they lack the precision of strobe tuners for professional work.
- Features:
- Pitch detection via microphone or direct contact with strings.
- Display of cents deviation (e.g., ±5 cents for "in tune").
- Some models include metronomes or recording functions.
- Limitations: Ambient noise and string sympathetic vibrations can affect accuracy.
- Examples: Korg OT-121, Snark ST-2, and Boss TU-3.
- Features:
-
Strobe Tuners
Strobe tuners are the gold standard for professional piano tuning, offering unparalleled accuracy by visually aligning a strobe light’s frequency with the string’s vibration. They require calibration and are less portable but provide immediate feedback on beat frequencies.
- Components:
- Strobe light module with adjustable frequency.
- Reference tuning fork or electronic oscillator.
- Contact or non-contact sensors for string excitation.
- Advantages: Detects beats per second (BPS), allowing tuners to adjust strings to a precise beat rate (e.g., 2 BPS for A440).
- Disadvantages: Higher cost, requires power source, and steep learning curve for beginners.
- Examples: Korg PT-60, Stump ST-1, and MTS-100.
- Components:
Preparation Steps for Piano Tuning
Preparing a piano for tuning involves environmental adjustments, physical inspection, and warming the instrument to achieve optimal tuning stability. Skipping these steps may result in inaccurate tuning or premature wear on mechanical components.-
Environmental Conditions
Humidity and temperature fluctuations cause wood to expand or contract, affecting tuning stability. Ideal conditions for tuning are 40–50% relative humidity and 70–75°F (21–24°C).
- Humidity Control:
- Use a hygrometer to measure humidity levels.
- Adjust with humidifiers (in dry climates) or dehumidifiers (in humid climates).
- Avoid sudden changes; aim for gradual stabilization over 24–48 hours.
- Temperature Stability:
- Tune in a room with consistent temperature to prevent wood movement.
- Avoid tuning near heating/cooling vents or direct sunlight.
- Humidity Control:
-
Physical Preparation of the Piano
Opening the lid and allowing the piano to "warm up" helps strings reach their optimal tension and resonance. This step is particularly critical for grand pianos, where the soundboard requires time to vibrate freely.
- Opening the Lid:
- For upright pianos, open the lid fully to expose all strings.
- For grands, ensure the lid is raised to its maximum height to avoid restricting bass string movement.
- Warming the Instrument:
- Play the piano for 15–30 minutes to stabilize temperature and reduce initial tuning instability.
- Focus on middle and low registers, as they are more prone to temperature-related pitch shifts.
- Opening the Lid:
-
Pre-Tuning Inspection Checklist
A thorough inspection identifies potential issues that could hinder tuning or indicate the need for maintenance. Addressing these problems beforehand ensures a smoother tuning process.
Component Inspection Criteria Action Required Tuning Pins Check for rounded edges, cracks, or excessive wear. Replace damaged pins; lubricate dry pins with pin conditioner. Pinblock Assess for swelling, warping, or separation from the soundboard. Consult a technician if swelling is severe; avoid tuning if unstable. Bridges Inspect for cracks, loose screws, or signs of structural weakness. Tighten screws or replace bridges if compromised. Strings Look for broken, corroded, or stretched strings, particularly in the bass. Replace damaged strings before tuning; note if multiple strings need replacement. Action (Mechanism) Test key action for stiffness, unevenness, or excessive resistance. Regulate or service the action if issues are detected. Soundboard Listen for dull or muted tones, indicating possible warping or loose braces. Consult a technician for soundboard repairs if necessary.
Comparison of Electronic and Strobe Tuners
The choice between electronic and strobe tuners depends on the tuner’s experience level, budget, and the piano’s condition. Below is a detailed comparison to aid in selection.| String Vibration Rate | Strobe Effect | Tuning Status |
|---|---|---|
| 440 Hz (Exact Match) | String appears frozen | Perfectly in tune |
| 442 Hz (Sharp) | String moves upward | Needs lengthening |
| 438 Hz (Flat) | String moves downward | Needs shortening |
| 441 Hz (Close) | Slow flicker (2 bps) | Fine-tune incrementally |
Note: Strobe tuners are most effective for mid-range strings (treble to mid-bass). Bass strings may require slower strobe speeds due to lower frequencies.
Maintenance and Long-Term Care for a Tuned Piano
Proper maintenance extends the lifespan of a piano’s tuning, preserves its tonal quality, and minimizes costly repairs. Between professional servicings, regular inspections and targeted care mitigate factors such as environmental stress, string wear, and mechanical degradation. This section outlines practical guidelines for sustaining tuning stability, caring for tools, and adapting maintenance routines to usage patterns and environmental conditions. A structured approach ensures optimal performance while reducing long-term deterioration risks.Regular Inspections for Tuning Stability
Consistent monitoring of key components prevents gradual tuning drift and identifies early signs of mechanical failure. Focus on string tension, pin stability, and action responsiveness, as these directly influence pitch retention. Perform visual and auditory checks monthly, with deeper inspections every 3–6 months depending on usage.Key inspection areas:
Critical Thresholds for Immediate Attention:
Pin Slippage: If a pin moves more than 1–2 mm when pressed, it requires professional re-gluing or replacement. String Breakage: Replace broken strings promptly to prevent uneven tension distribution across the frame. Environmental Damage: Visible mold, warping, or swelling in wood components signals humidity-related stress requiring immediate correction.
Care and Maintenance of Tuning Tools
Precision tuning tools degrade over time due to wear, corrosion, or improper handling. Regular cleaning, lubrication, and storage practices preserve their accuracy and longevity. Neglect leads to slippage, inaccurate measurements, or tool failure mid-tuning.Tool-Specific Maintenance Protocols:
- Tuning Hammers (Mallelets):
- Tuning Wrenches and Levers:
- Stroboscopic Tuning Devices:
- Pin Block Wrenches and Peg Wrenches:
Tool Longevity Best Practices:
Avoid Dropping or Impact: Store tools in designated compartments to prevent damage to delicate components. Separate Metal and Rubber Tools: Metal tools can accelerate wear on rubber-headed hammers if stored together. Document Tool History: Record purchase dates and maintenance intervals to track performance degradation over time.
Recommended Tuning Frequency Based on Usage and Environment
Tuning frequency depends on piano usage, environmental conditions, and instrument age. Below is a structured table outlining intervals for optimal pitch stability, derived from industry standards (e.g., Piano Technicians Guild) and empirical observations.| Usage Category | Environmental Factors | Recommended Tuning Interval | Notes |
|---|---|---|---|
| Professional/Performance | Stable (60–70% humidity, 68–72°F) | Every 4–6 weeks | High-stress strings require frequent adjustments. Use a humidifier/dehumidifier to maintain stability. |
| Daily Practice (3+ hours/week) | Moderate (50–60% humidity, seasonal temperature shifts) | Every 6–8 weeks | Monitor for string sag or pin slippage during rapid climate changes. |
| Occasional Play (<1 hour/week) | Controlled (45–55% humidity, minimal temperature fluctuations) | Every 3–4 months | Extend intervals if the piano is in a climate-controlled space with stable conditions. |
| Seasonal/Storage | High Humidity (>70%) or Extreme Dryness (<40%) | Every 2–3 months (or before use) | Use a hygrometer to track humidity; adjust with a piano humidifier or dehumidifier. |
| New Pianos (<5 years old) | Any | Every 6–12 weeks (initial stabilization period) | New strings stretch significantly; expect tuning to stabilize after 6–12 months. |
| Vintage Pianos (>50 years old) | Variable | Every 3–6 weeks (with bi-annual professional servicing) | Older instruments require more frequent checks for action wear and string corrosion. |
Environmental Adjustments:
Humidity: Maintain 45–55% relative humidity. Below 40% causes wood to shrink, increasing tuning instability; above 60% promotes mold and pin corrosion. Temperature: Avoid fluctuations >10°F (5.5°C) daily. Sudden changes warp the soundboard and bridge. Ventilation: Ensure airflow around the piano to prevent moisture buildup, but avoid direct sunlight or drafts near the instrument.
Procedures for Storing a Piano in Non-Optimal Conditions
Pianos stored in environments with extreme humidity, temperature swings, or lack of maintenance risk irreversible damage, including warping, rust, and tuning instability. Below is a step-by-step protocol to mitigate risks during off-seasons or temporary relocation.Pre-Storage Preparation:
1. Professional Servicing:
Storage Configuration:
Practical Examples and Common Scenarios in Piano Tuning
Piano tuning requires adaptability to varying conditions, instruments, and environments. Whether tuning a grand piano in a concert hall, a vertical piano in a home, or addressing structural issues post-transportation, each scenario demands specific techniques and considerations. This section provides real-world examples, troubleshooting strategies, and alternative methods to ensure accurate tuning across diverse settings. Understanding these scenarios helps maintain instrument integrity while optimizing performance outcomes.Tuning a Piano in Different Environments
Environmental factors significantly influence tuning stability and technique selection. Humidity, temperature fluctuations, and acoustic properties of a space can affect string tension, hammer action, and overall tuning retention. Below are tailored approaches for common settings:Key Consideration: Always allow the piano to acclimate to the room’s conditions for at least 24 hours before tuning to minimize thermal expansion or contraction of the frame and strings.
-
Home Use (Vertical Pianos)
- Acoustic Adaptation: Homes often have softer acoustics, which may require slight adjustments to perceived pitch due to room resonance. Use a stethoscope or electronic tuner to verify pitch without relying solely on ear training.
- Humidity Control: If the home lacks a humidifier/dehumidifier, monitor the piano’s condition for cracked soundboard or swollen keys—signs of extreme dryness or moisture. Temporary fixes include placing a hydrometer near the piano and using silica gel packs in dry climates.
- Child or Pet Safety: Secure the piano lid and use soft padding on hammers if tuning near delicate surfaces. Avoid tuning near open windows or drafts, which can destabilize temperature.
-
Church or Rehearsal Spaces (Grand or Upright Pianos)
- Acoustic Challenges: Large spaces with hard surfaces (e.g., marble floors) amplify string vibrations, making pitch detection more acute. Use a metronome or digital tuner to cross-reference with a reference pitch (e.g., A440 Hz) in such environments.
- Frequent Use: Pianos in high-traffic areas (e.g., weekly services) may require more frequent tuning (every 4–6 weeks) due to consistent playing. Prioritize middle and bass strings, which are most affected by heavy use.
- Structural Checks: Inspect for loose pins or cracked pinblocks, common in older church pianos. Temporarily stabilize loose pins with rubber bands or pin clamps while assessing professional repair needs.
-
Outdoor or Temporary Setups (e.g., Festivals, Weddings)
- Temperature Extremes: Pianos exposed to direct sunlight or cold drafts (e.g., tents) may experience rapid pitch shifts. Use a portable humidifier and avoid tuning in direct sunlight; opt for early morning or late evening sessions.
- Transportation Stress: If tuning a piano recently moved, wait 48 hours before tuning to allow the frame to settle. Check for uneven leg levels (use a spirit level) and adjust with shims if needed.
- Acoustic Masking: Outdoor noise (e.g., wind, crowds) can interfere with pitch perception. Isolate the piano with blankets or use noise-canceling headphones while tuning, or rely on a digital tuner with a strong signal.
Tuning a Piano with a Broken or Missing String
A broken or missing string disrupts harmonic balance and requires immediate attention to prevent further damage. Temporary fixes can restore playability, but professional assessment is critical for long-term solutions.Critical Action: Never force a broken string into place; this can damage the bridge, soundboard, or tuning pins. Always remove the broken string before proceeding.
-
Identifying the Issue
- Visual Inspection: Look for frayed ends, rust spots, or sagging strings. Use a flashlight to check the harp area (where strings are anchored).
- Auditory Clues: A missing string will produce a muted or absent note when played. Compare with adjacent strings to confirm.
- String Mapping: Refer to the piano’s string map (often found in the action or pinblock) to identify the missing string’s gauge and location. Common breakage occurs in the bass strings (wound with copper/wire) due to higher tension.
-
Temporary Fixes for Playability
-
Replacing with a Spare String:
- Obtain a replacement string of the same gauge and material (e.g., steel for treble, copper-wound for bass).
- Use a string winder to remove the broken string from the hitch pins and bridge.
- Thread the new string through the tuning pin, bridge, and hitch pins, ensuring no kinks.
- Tune to pitch using the unison tuning method (matching the pitch of adjacent strings).
-
Replacing with a Spare String:
-
Muting the Note:
- If replacement isn’t immediate, place a small piece of felt or rubber between the hammer and string to dampen the sound.
- Mark the affected key with tape to warn users of the missing note.
-
Emergency Bass String Fix:
- For bass strings, if the break is near the pin, tie a knot with a nylon string as a temporary anchor before replacing.
- Avoid over-tightening to prevent pin slippage.
-
When to Seek Professional Help
- Structural Damage: If the bridge, soundboard, or pinblock shows cracks or warping, professional repair is required to prevent further instability.
- Multiple Broken Strings: Two or more broken strings in the same area may indicate corrosion, improper voicing, or frame issues, necessitating a full inspection.
- High-Tension Strings: Bass strings (e.g., A1–C3) require specialized tools (e.g., bass string winder) and expertise to replace safely.
Tuning a Piano After Transportation or Moving
Transportation subjects pianos to vibrations, temperature shifts, and humidity changes, often leading to out-of-tune strings, loose pins, or structural misalignment. A systematic post-move inspection ensures the piano remains playable and tunable.Pre-Tuning Checklist:
Verify all legs are level (use a spirit level). Inspect for loose screws or damaged pedals. Check the action (key mechanism) for stiffness or resistance.
-
Initial Structural Assessment
-
Frame and Pinblock Inspection:
- Listen for creaking or popping sounds when pressing keys, which may indicate frame stress.
- Use a flashlight to check for cracks in the pinblock or soundboard.
-
Frame and Pinblock Inspection:
-
Leg and Leveling:
- Adjust uneven legs with shims (wooden wedges) to ensure the piano sits perfectly level. Unevenness can cause string tension imbalance.
- Avoid over-tightening the leveling screws, which may damage the apron.
-
Action and Keybed:
- Press each key to check for uneven resistance or sticking keys, which may require regulation adjustments.
- Lubricate the feeler and check rails with piano action oil if keys feel stiff.
-
Tuning Procedure for Recently Moved Pianos
-
Acclimation Period:
- Allow the piano 48–72 hours to adjust to the new environment before tuning. Monitor hum
Tuning a piano is both a technical and artistic endeavor, demanding patience, analytical thinking, and a keen ear for subtle variations in pitch. By following the structured methodology outlined—from identifying the A440 reference note to mastering the unison and octave method—you gain control over an instrument that otherwise requires professional intervention. The ability to diagnose issues, such as uneven tension or environmental discrepancies, ensures that your piano remains in optimal condition year-round. Whether you are tuning for personal enjoyment or preparing for a performance, the skills acquired here empower you to take ownership of your instrument’s sound quality. Ultimately, the journey from a slightly out-of-tune piano to a harmoniously resonant masterpiece lies in your hands, blending technical precision with the intangible beauty of music.
-
Acclimation Period:
Leave a Comment
Comments are moderated before appearing. The data you submit is processed according to the Privacy Policy of www.linuxunplugged.com.