How To Make Paper Containers Efficiently And Sustainably

Published

how to make paper containers - Kesimpulan
Table of Contents

Paper containers represent a versatile and eco-conscious alternative to traditional packaging, blending functionality with environmental responsibility. From single-use cups to reusable storage solutions, their adaptability spans industries, yet their craftsmanship demands precision in material selection, structural design, and sealing techniques. This guide explores the foundational principles of constructing durable paper containers, balancing cost-effectiveness with sustainability through innovative materials and assembly methods. Whether for commercial applications or DIY projects, mastering these techniques ensures containers that meet performance demands while minimizing ecological impact.

The process begins with material sourcing, where the choice between kraft paper, cardstock, or wax-coated substrates directly influences durability, liquid resistance, and aesthetic appeal. Reinforcement methods—ranging from adhesive bonding to mechanical stitching—further enhance structural integrity, particularly for containers exposed to moisture or weight. Customization extends beyond visual enhancements like embossing or screen printing to incorporate practical features such as insulated liners or modular compartments, catering to niche use cases from food service to organizational storage. By integrating eco-friendly alternatives and scalable production techniques, creators can align efficiency with sustainability, fostering a shift toward biodegradable packaging solutions.

Materials and Preparation for Crafting Durable Paper Containers

The selection and preparation of materials form the foundation of durable, functional paper containers. Proper material choice ensures structural integrity, liquid resistance, and sustainability, while precise preparation techniques optimize performance for specific applications. This section outlines essential materials—including paper types, reinforcements, and tools—alongside step-by-step preparation methods, comparative durability assessments, and eco-friendly sourcing strategies.

Essential Materials for Paper Container Construction

Durable paper containers require a combination of base materials, adhesives, and reinforcements tailored to their intended use. The choice of paper type significantly influences liquid resistance, structural strength, and environmental impact. Below are the core materials categorized by function, along with their roles in container fabrication.

Key Consideration: Material selection must balance cost, durability, and sustainability to meet functional and regulatory requirements (e.g., food-grade safety, compostability).

  1. Base Paper Types
    Kraft paper remains the most common substrate due to its strength and affordability, but alternatives like cardstock, wax-coated paper, or recycled fiberboard offer specialized properties.
    • Kraft Paper: Unbleached, high tensile strength; ideal for takeaway containers, packaging, and general-purpose use. Often treated with silicone or wax for liquid resistance.
    • Cardstock (e.g., 200–300 gsm): Thicker than kraft, used for rigid containers (e.g., gift boxes, lids). Poor liquid resistance unless laminated.
    • Wax-Coated Paper: Food-safe paraffin or soy-based coatings create a moisture barrier for cups, bowls, and baking containers.
    • Recycled Paperboard: Lightweight and eco-friendly, suitable for disposable containers but requires additional sealing layers for liquids.
    • Plant-Based Polymers (e.g., PLA-coated): Biodegradable alternative for compostable containers, though structural integrity varies under high heat.
  2. Adhesives and Sealants
    The choice of adhesive determines liquid resistance, heat tolerance, and ease of assembly. Common options include:
    • White Glue (PVA): Non-toxic and water-soluble; suitable for non-liquid applications (e.g., labels, non-structural folds).
    • Hot Glue (EVA): High bond strength but not food-safe unless encapsulated. Used for reinforcing seams.
    • Food-Grade Wax or Resin: Applied via brush or dip-coating for liquid-proofing (e.g., soy wax for compostable containers).
    • Waterproof Tape (e.g., duct tape, silicone tape): Temporary reinforcement for edges or seams in non-food applications.
  3. Reinforcement Materials
    Edges and seams are critical failure points in paper containers. Reinforcements include:
    • Fiber Mesh or Fabric: Embedded in paper layers to prevent tearing (common in high-stress applications like shipping containers).
    • Metal or Plastic Clips: Used for modular designs (e.g., stackable cups with snap-on lids).
    • Corrugated Board Inserts: Added to the base of containers to distribute weight (e.g., for heavy liquids like soups).
  4. Tools for Fabrication
    Precision tools ensure consistency and efficiency in production:
    • Cutting Tools: Laser cutters, die-cut machines, or precision scissors for clean edges.
    • Heat Sources: Heat guns or irons for sealing wax-coated paper or activating adhesive.
    • Stamping/Embossing Tools: For branding or texture enhancement (e.g., raised patterns to improve grip).
    • Measuring Instruments: Digital calipers or rulers for maintaining uniform dimensions.

Step-by-Step Material Preparation Guide

Preparing materials for paper containers involves dimensional accuracy, edge reinforcement, and compatibility testing to ensure functionality. Below is a structured workflow for achieving durable, high-performance containers.

Critical Step: All materials must undergo a pre-assembly inspection for defects (e.g., tears, uneven coatings) that could compromise structural integrity.

  1. Dimensional Planning and Cutting
    Precision cutting is essential to minimize waste and ensure container fit. Use templates or CAD designs to achieve consistent shapes.
    • Measure and mark paper sheets using a ruler or laser guide, accounting for fold allowances (typically 3–5mm).
    • For cylindrical containers (e.g., cups), calculate the circumference using the formula:
      Circumference (C) = π × Diameter (D)
      Example: A 9cm diameter cup requires a paper strip ~28.3cm long (π × 9 ≈ 28.27).
    • Cut along marked lines with a sharp blade or die-cut machine to prevent fraying.
  2. Edge Reinforcement Techniques
    Unreinforced edges are prone to delamination or tearing. Apply one of the following methods:
    • Folded Hem: Fold the edge inward 2–3mm and secure with glue or staples. Ideal for lightweight containers.
    • Taped Seam: Apply waterproof tape to the inner edge before folding. Common in disposable cups.
    • Wax Dipping: Submerge edges in molten wax (e.g., beeswax or soy wax) for liquid resistance.
  3. Liquid Resistance Testing
    Containers intended for liquids must undergo simulated use tests:
    • Fill the container with water and observe for leaks or swelling after 1 hour.
    • For wax-coated paper, test heat tolerance by placing a hot liquid (e.g., 60°C water) and checking for melting or warping.
    • Conduct a drop test from 1 meter onto a hard surface to assess structural resilience.
  4. Assembly and Sealing Protocols
    Follow manufacturer guidelines for adhesives and sealants:
    • Apply hot glue sparingly along seams, allowing 30 seconds to set before folding.
    • For wax-sealed containers, use a heat source (e.g., heat gun) to melt the coating evenly across the surface.
    • Press assembled containers under a weighted object for 5 minutes to ensure bond integrity.

Comparison of Material Types for Paper Containers

Selecting the appropriate material depends on the container’s intended use, budget, and environmental goals. The table below compares common materials across key performance metrics, including durability, cost, and suitability for specific applications.
Material Type Best Use Case Durability Level Cost Range (per sheet or unit)
Kraft Paper (Untreated) Dry goods packaging, takeaway boxes (non-liquid) Medium (prone to tearing; requires reinforcement) $0.05–$0.20
Kraft Paper (Wax-Coated) Takeaway cups, baking containers, liquid storage High (resists moisture; heat-sensitive) $0.10–$0.50
Cardstock (200–300 gsm) Rigid boxes, lids, decorative containers Low–Medium (poor liquid resistance) $0.15–$0.80
Recycled Paperboard Disposable plates, eco-friendly packaging Low (requires laminating for liquids) $0.08–$0.30

Foundational Folding and Assembly Techniques for Paper Containers

Paper containers rely on precise folding techniques to achieve structural integrity, seal integrity, and functional adaptability. The foundational methods—gusset folds, pleat folds, and box-base structures—determine the container’s capacity, durability, and ease of assembly. These techniques are categorized by their geometric precision, material efficiency, and compatibility with manual or automated production. Below are the core folding methodologies, their applications, and comparative analysis of traditional and machine-assisted techniques.

Gusset Folds and Their Structural Applications

Gusset folds introduce additional material layers to reinforce edges, increase volume, or create flexible joints. They are essential in containers requiring expandability (e.g., shipping boxes) or stability (e.g., takeout trays). The most common gusset configurations include 45-degree gussets, 90-degree gussets, and slotted gussets, each serving distinct purposes in load distribution and stacking strength.

Key Gusset Folding Steps (45-Degree Example):
1. Score and fold the base panel at a 45-degree angle from the edge, creating a triangular flap. The score line should align with the container’s height to ensure uniform stress distribution.
2. Fold the flap inward along the score line, then fold the adjacent side panel upward to form the gusset’s second layer. The overlapping edges should meet at the container’s seam.
3. Secure with adhesive or stitching to prevent delamination under load. For cylindrical containers, gussets are often paired with pleat folds to accommodate circular bases.

Standard gusset dimensions for a 12-inch diameter cylindrical container:
  • Base panel width: 3.5 inches (including 0.5-inch overlap for sealing).
  • Gusset height: 2.5 inches (adjustable for depth).
  • Score lines: 45 degrees from the base edge, extending to the container’s mid-height.
  • Pleat Folds for Flexibility and Volume Adjustment

    Pleat folds create accordion-like structures that allow containers to compress or expand, ideal for nested designs or variable-content storage (e.g., utensil sleeves, straw holders). Unlike gussets, pleats distribute stress across multiple folds rather than concentrated points, reducing tear risks. Common pleat types include:
  • Parallel pleats: Uniform folds running perpendicular to the container’s length, used in collapsible tubes.
  • V-shaped pleats: Converging folds for tapered containers (e.g., ice cream cups).
  • Box pleats: Alternating folds forming a grid pattern, enhancing rigidity in flat-packed designs.
  • Assembly of a Pleated Sleeve Container (Example: Utensil Holder)

    Template dimensions for a 6-inch long sleeve (collapsed):
  • Base width: 2.5 inches (including 0.25-inch hem allowance).
  • Pleat depth: 0.5 inches (measured from fold crest to valley).
  • Fold lines: Spaced 0.75 inches apart, with 0.125-inch crease depth for crisp folding.
    1. Prepare the flat pattern: Use a template with parallel fold lines spaced evenly across the width. For a 6-inch sleeve, create 3 pleats (4 folds total) with 0.75-inch intervals.
    2. Score and fold: Crease each fold line with a bone folder or scoring tool. Fold the pleats alternately upward and downward to form a zigzag pattern.
    3. Assemble the cylinder: Align the long edges with a 0.25-inch overlap. Secure with adhesive or a staple at the seam, then tuck the ends inward to form a closed loop.
    4. Reinforce edges: Apply a strip of reinforced tape or a second layer of paper along the seam to prevent unraveling during use.
    Visual Breakdown of Pleat Folding (Textual Description):

    Flat pattern (unfolded):
    [---------------------]
    | |
    | Fold Line 1 |
    | / \ |
    | / \ |

    / \
    Fold Line 2
    \ /
    \ /
    \ /
    [---------------------]

    Folded sleeve (cross-section):
    _______
    / \
    / \
    | |
    \ /
    \_______/

    Box-Base Structures and Sealing Methods

    Box-base structures form the foundation of rigid containers, using tuck flaps, glue flaps, or lock-bottom designs to ensure stability. The choice of base type depends on the container’s intended use:
  • Tuck flaps: Simple and cost-effective, suitable for lightweight items (e.g., gift boxes).
  • Glue flaps: Provide stronger adhesion but require precise adhesive application (common in retail packaging).
  • Lock-bottoms: Interlocking flaps for reusable containers (e.g., lunch boxes).
  • Step-by-Step Assembly of a Cylindrical Container with a Glue-Flap Base

    Flat pattern requirements for a 4-inch diameter × 5-inch height cylinder:
  • Base circle diameter: 4 inches (cut from a 4.5-inch square for waste allowance).
  • Side panel height: 5 inches (including 0.5-inch overlap for sealing).
  • Flap dimensions: 1.5 inches wide × 0.75 inches deep (adjustable for adhesive coverage).
    1. Cut the base circle: Use a compass or template to mark a 4-inch diameter on a 4.5-inch square of cardboard. Cut along the circle, leaving a 0.25-inch border for reinforcement.
    2. Attach side panels: Fold the remaining 0.25-inch border upward to create a 0.5-inch flange. Glue or staple the side panels (pre-cut to 5-inch height) to the flange, ensuring the seam is centered.
    3. Form the base flaps: Extend two 1.5-inch × 0.75-inch flaps from the base circle’s edge, positioned opposite each other. Apply adhesive to the flaps’ inner surfaces.
    4. Seal the base: Fold the flaps upward at a 90-degree angle, then press them together to form a square base. Reinforce with a dab of adhesive at the corners.
    5. Close the top: Fold the top edge of the side panel downward to create a rim. Secure with a glue flap or tuck the edge under a separate lid panel.

    Comparison: Hand-Folding vs. Machine-Assisted Techniques

    The choice between manual and automated folding influences production speed, precision, and material waste. Below is a comparative analysis of key methods:
    MethodPrecisionEfficiencyMaterial WasteCostApplications
    Hand-folding (manual scoring) ±0.125 inches (varies by skill) 10–50 units/hour High (irregular cuts, misaligned folds) Low (labor-intensive) Prototyping, small-batch production, custom designs
    Die-cutting (machine-scored) ±0.005 inches (consistent) 500–2,000 units/hour Low (optimized templates) High (tooling costs) Mass production, retail packaging, industrial use
    Laser-scoring (hybrid) ±0.01 inches (precise creases) 200–800 units/hour Moderate (minimal waste) Moderate (initial setup) Mid-volume runs, eco-friendly designs
    Trade-offs in Precision Requirements:
  • Manual methods excel in customization but lack repeatability, making them unsuitable for containers requiring tight tolerances (e.g., pharmaceutical packaging).
  • Machine-assisted techniques prioritize speed and consistency but demand higher upfront investment in tooling (e.g., die-cutting molds). Laser-scoring bridges the gap by offering precision without excessive waste, though it is less common for high-volume production due to slower throughput.
  • Template for a Foldable Sleeve Container

    Below is a pre-formatted template for a 6-inch collapsible sleeve (e.g., utensil or straw holder), including fold lines and measurements. Dimensions assume 200 gsm cardboard for durability.

    +-------------------------------------+
    | |
    | [Fold Line 1

    Sealing and Reinforcement Methods for Paper Containers

    Effective sealing and reinforcement are critical to ensuring the durability, water resistance, and structural integrity of paper containers. Adhesive techniques, mechanical reinforcements, and protective coatings each serve distinct purposes depending on the intended use—whether for lightweight packaging, food storage, or heavy-duty industrial applications. The choice of method impacts longevity, ease of assembly, and environmental compatibility, making it essential to align material selection with functional requirements.

    Sealing methods determine how securely edges and seams remain intact under stress, while reinforcement techniques distribute weight and prevent deformation. Natural and synthetic adhesives offer varying degrees of water resistance and drying times, whereas mechanical methods like stitching or stapling provide physical resistance to tearing. Coatings, such as wax or synthetic resins, add an additional barrier against moisture, extending usability in humid or wet conditions.

    Adhesive Techniques for Securing Paper Seams

    Adhesives are the most common method for sealing paper containers due to their simplicity and cost-effectiveness. However, their performance varies significantly based on composition, drying time, and resistance to environmental factors. Below is a comparison of adhesive types, highlighting their suitability for different applications, application processes, and expected longevity.
    Sealing Method Best For Application Process Longevity
    PVA Glue (Polyvinyl Acetate)
    • Lightweight containers (e.g., gift boxes, decorative packaging).
    • Projects requiring non-toxic, water-soluble adhesives.
    • Applications where quick drying (5–15 minutes) is advantageous.
    1. Apply glue sparingly along the seam with a brush or foam applicator.
    2. Press edges firmly together and clamp for 1–2 minutes to prevent shifting.
    3. Avoid over-saturating paper to prevent warping or weakening.
    • Moderate water resistance when dry; dissolves in prolonged moisture.
    • Lifespan: 6–12 months for indoor use; degrades faster in humid conditions.
    • Not suitable for food-grade containers unless certified non-toxic.
    Starch Paste (Corn or Potato-Based)
    • Traditional crafting (e.g., origami, bookbinding).
    • Biodegradable and non-toxic applications.
    • Reusable containers where minimal structural stress is expected.
    1. Mix starch powder with water (1:1 ratio) and heat until thickened (stovetop or microwave).
    2. Cool to room temperature before applying with a brush or sponge.
    3. Seal seams by pressing edges together and allow to dry for 24 hours.
    • Poor water resistance; rehydrates when exposed to moisture.
    • Lifespan: 3–6 months for dry indoor use; degrades rapidly outdoors.
    • Ideal for temporary or non-load-bearing containers.
    Heat-Activated Adhesives (e.g., Hot Glue)
    • Heavy-duty containers (e.g., storage bins, industrial packaging).
    • Rapid assembly where immediate bonding is required.
    • Applications needing high initial strength (e.g., layered cardboard).
    1. Use a glue gun set to 300–350°F (150–175°C) for paper compatibility.
    2. Apply a thin, continuous bead along the seam.
    3. Press edges together for 10–30 seconds until adhesive cools and sets.
    • Excellent water resistance when fully cured.
    • Lifespan: 1–3 years for indoor use; brittle over time under UV exposure.
    • Not food-safe unless specified; may melt under high temperatures.
    Wax Dipping (Beeswax or Soy Wax)
    • Waterproofing seams in food-grade containers (e.g., beeswax wraps).
    • Decorative or rustic-style packaging.
    • Applications requiring flexibility and breathability.
    1. Melt wax in a double boiler (beeswax: 145–155°F / 63–68°C; soy wax: 120–130°F / 49–54°C).
    2. Dip folded edges into wax for 2–3 seconds or brush on a thin layer.
    3. Allow to cool and harden (5–10 minutes). Repeat for thicker coatings.
    • Natural waxes: Moderate water resistance; reusable but degrades after 6–12 months.
    • Soy wax: Biodegradable; lasts 3–6 months before requiring reapplication.
    • Best for short-term or reusable containers; not for heavy loads.
    Key Considerations for Adhesive Selection:
    Adhesive performance is influenced by paper thickness, environmental exposure, and intended load capacity. For example, PVA glue is unsuitable for outdoor containers due to its water solubility, while heat-activated adhesives may crack under prolonged UV exposure unless protected with a sealant.

    Non-Adhesive Reinforcement Methods for Structural Integrity

    Mechanical reinforcements provide physical strength without relying on chemical bonds, making them ideal for heavy-duty containers or applications where adhesives may fail (e.g., high humidity, temperature fluctuations). These methods distribute stress across the container’s structure, reducing the risk of seam failure or warping.

    Mechanical Reinforcement Techniques:

    Structural integrity is prioritized in non-adhesive methods, with stitching and stapling offering the highest resistance to tearing. However, these techniques require precision and may not be suitable for intricate designs or curved surfaces.
    • Stitching with Thread or Twine

      Sewing paper edges with thread creates a permanent, flexible bond suitable for high-stress applications. Traditional bookbinding stitches (e.g., Coptic stitch, link stitch) are commonly used for layered or multi-ply containers.

      • Materials:
        • Heavy-duty thread (polyester or cotton) for durability.
        • Needles sized for paper thickness (e.g., sharp embroidery needles for single-ply, upholstery needles for multi-layer).
      • Process:
        1. Mark stitching points along the seam (1/4–1/2 inch intervals).
        2. Use a waxed thread for smoother stitching and reduced fraying.
        3. Stitch through all layers, securing the end with a knot or backstitch.
      • Advantages:
        • Superior tear resistance compared to adhesives.
        • Adjustable tension for snug or flexible fits.
        • Reusable and repairable.
      • Limitations:
        • Time-consuming for large-scale production.
        • Thread may degrade under prolonged moisture or

          Customization and Functional Additions for Paper Containers

          Paper containers transcend their primary purpose of storage and transport by integrating decorative and functional enhancements tailored to aesthetic preferences and practical applications. Customization elevates their visual appeal while reinforcing durability, user experience, and brand identity. Functional additions—such as ergonomic handles, secure closures, or modular compartments—extend versatility for niche uses, including culinary, retail, or promotional packaging. This section explores decorative techniques that preserve structural integrity, methods for attaching functional components with precision, and innovative features designed for specialized applications. Branding integration is also addressed, emphasizing seamless fusion of visual identity with container design.

          Decorative Techniques for Enhanced Aesthetics Without Compromising Functionality

          Decorative methods must balance visual impact with material resilience, ensuring treatments do not weaken the paper’s structural properties or interfere with sealing mechanisms. Techniques vary in complexity, from low-cost, manual processes to industrial-grade finishes requiring specialized equipment. Below are categorized methods, their tools, and applications, along with considerations for material compatibility.
          Key Principle: Decorative layers should adhere to the paper’s moisture barrier (if present) and avoid excessive weight that could distort folds or seams.
          • Embossing and Debossing

            Embossing creates raised designs, while debossing produces recessed patterns, adding tactile and visual interest. Tools include:

            • Manual Embossing Tools: Steel dies (e.g., floral, geometric) paired with a rubber pad or hydraulic press for small-scale production. Dies are heated for thermoplastic-coated paper (e.g., laminated cardstock).
            • Industrial Embossing Presses: Rotary or flatbed presses with digital die-cutting for large batches. Ideal for branded packaging (e.g., luxury food containers).
            • Thermal Embossing: Uses heat-activated adhesive films (e.g., PVC-free laminates) to create 3D effects without altering paper thickness.

            Enhancement: Elevates perceived value; embossed logos or textures (e.g., linen finish) improve grip and reduce slippage. For containers, avoid embossing near fold lines to prevent stress points.

          • Screen Printing

            Applies ink through stencils (screens) for vibrant, durable graphics. Tools and materials:

            • Screens: Fine-mesh polyester (e.g., 110–200 TPI for detail) or aluminum for heavy-duty use. Pre-sensitized screens require UV exposure to harden stencil emulsion.
            • Inks:
              • Water-based (eco-friendly, dries quickly, compatible with uncoated paper).
              • UV-curable (high gloss, resistant to scratching; requires UV lamp).
              • Solvent-based (durable but toxic; limited to industrial settings).
            • Equipment: Manual squeegees for small runs; automatic screen printers for production. Flash dryers or conveyor belts accelerate curing.

            Enhancement: Ideal for bold designs (e.g., food-grade inks for takeout containers). Use matte inks on glossy surfaces to prevent glare. Avoid overprinting near seams to prevent ink bleed during folding.

          • Foil Stamping

            Applies metallic or pigmented foil using heat and pressure, creating luxurious finishes. Tools:

            • Foil Dies: Custom-cut dies (e.g., brass or polymer) matching container shapes. Common foils: gold, silver, holographic, or spot UV.
            • Heat Sources:
              • Manual stamps with replaceable heads (e.g., Vulcan stamps).
              • Automatic foil stamping machines (e.g., Bobst series) for high-volume production.
            • Adhesives: Heat-activated glues (e.g., acrylic-based) or pressure-sensitive foils for cold application.

            Enhancement: Foil stamping on lids or logos adds premium appeal (e.g., coffee cups, gift boxes). Use foil with low tack to prevent peeling during handling. For curved surfaces, employ flexible dies.

          • Digital Printing and Laser Cutting

            High-resolution methods for intricate designs or laser-engraved details. Tools:

            • Digital Printers: Inkjet (e.g., Epson F170) for full-color prints on coated paper. Use pigment-based inks for water resistance.
            • Laser Cutters: CO₂ lasers (e.g., Epilog) for precise cuts or engravings (e.g., brand logos, ventilation slits). Requires paper with low flammability (e.g., Kraft with silicone coating).
            • Raised Textures: Combine laser cutting with embossing by pre-engraving lines, then applying a resin fill for 3D effects.

            Enhancement: Laser-cut ventilation holes improve airflow for baked goods, while printed QR codes enable digital engagement (e.g., linking to recipes). Ensure laser settings avoid charring uncoated paper.

          • Textured and Metallized Coatings

            Adds visual and functional layers via coatings. Materials:

            • Matte/Gloss Lamination: Polypropylene or PET films applied via laminators (e.g., MBO roll-fed systems). Gloss enhances ink vibrancy; matte reduces fingerprints.
            • Metallized Films: Aluminum-coated PET (e.g., Melinex) for reflective surfaces. Use static-free rollers to prevent dust adhesion.
            • Thermochromic Coatings: Temperature-sensitive inks (e.g., Tempil) that change color with heat/cold, ideal for insulated containers.

            Enhancement: Metallized interiors reflect light in dark containers (e.g., dessert boxes), while thermochromic coatings signal food temperature (e.g., "keep warm" indicators). Seal edges with heat to prevent delamination.

          Functional Add-Ons: Construction Methods and Weight-Bearing Limits

          Functional components must align with the container’s intended use, balancing usability with structural integrity. Below are standardized techniques for attaching add-ons, including material specifications and performance considerations.
          Design Consideration: All attachments should distribute weight evenly to prevent stress on seams or folds. Test prototypes with 1.5× the expected load to ensure safety margins.
    how to make paper containers - Kesimpulan

    how to make paper containers - Kesimpulan

    Leave a Comment

    Comments are moderated before appearing. The data you submit is processed according to the Privacy Policy of www.linuxunplugged.com.