computer wont connect to internet troubleshooting guide

Published

computer wont connect to internet
Table of Contents

When a computer fails to establish an internet connection, the disruption can stem from a complex interplay of hardware, software, and network configurations. This guide systematically dissects the root causes—ranging from loose Ethernet cables to misconfigured DNS settings—while providing actionable solutions for both technical novices and seasoned IT professionals. By leveraging structured diagnostics, command-line tools, and router-level adjustments, users can isolate issues efficiently, whether the problem originates from the device, local network, or service provider.

The process begins with verifying physical connections and interpreting error codes, progressing through driver updates and network stack resets, before delving into advanced configurations like static IP assignments and router firmware checks. Each step is supported by comparative tables, step-by-step scripts, and visual aids to ensure clarity, while troubleshooting methodologies adapt to Windows, macOS, and Linux environments. Understanding these foundational elements not only restores connectivity but also equips users with proactive strategies to prevent future disruptions.

computer wont connect to internet

Troubleshooting Initial Checks for Internet Connectivity Issues

Internet connectivity failures often stem from misconfigurations, hardware malfunctions, or service interruptions. Before proceeding to advanced diagnostics, systematic verification of physical connections, network indicators, and basic configurations ensures efficient isolation of the root cause. This section outlines structured methods to assess connectivity at the hardware, network, and service levels, including visual diagnostics, comparative troubleshooting tables, and error-code interpretation frameworks.

Verification of Physical Connections and Network Indicators

Physical connectivity failures are among the most common causes of internet disconnection. Visual inspection of cables, LEDs, and signal strength provides immediate clues to hardware-related issues.

Ethernet Cable Connections

  • Step 1: Inspect the Cable
  • Examine the Ethernet cable for physical damage (e.g., bent connectors, frayed wires, or exposed conductors). Replace the cable if defects are observed.
  • Step 2: Verify Ports and LEDs
  • Device Port (Laptop/PC): Check for a solid green or orange LED near the Ethernet port, indicating active data transmission.
  • Router/Switch Port: Ensure the corresponding port LED is lit (typically green for active connections). A blinking or off LED suggests a disconnected or faulty port.
  • Step 3: Test with a Known-Working Cable
  • Use a different Ethernet cable to rule out cable-specific failures. If connectivity is restored, the original cable is defective.

    Wi-Fi Signal Verification

  • Step 1: Check Signal Strength
  • On the device, verify Wi-Fi signal strength (e.g., via system tray icons or Wi-Fi settings). Weak signals (<2 bars) may indicate distance from the router or interference.
  • Step 2: Inspect Router LEDs
  • Wi-Fi LED: A steady blue/green light confirms the wireless network is active. A blinking or off LED may indicate a disabled radio or firmware issue.
  • 2.4GHz/5GHz LEDs (if separate): Ensure the relevant band is operational (e.g., 5GHz LED lit if using that band).
  • Step 3: Verify Router Placement
  • Ensure the router is placed centrally, away from obstructions (e.g., walls, metal objects) and electronic devices causing interference (e.g., microwaves, cordless phones).

    Expected Visual Indicators of Failure

    ComponentExpected LED BehaviorFailure Indicator
    Ethernet CableGreen/orange LED (steady)No LED or flickering
    Router Ethernet PortGreen LED (steady)Off or amber LED
    Wi-Fi RadioBlue/green LED (steady)Off or blinking erratically
    Modem PowerSolid green/white LEDOff or flashing red

    Comparative Troubleshooting Methods for Wired and Wireless Connections

    Wired (Ethernet) and wireless (Wi-Fi) connections require distinct diagnostic approaches due to their underlying technologies. Below is a comparative table outlining tools, commands, and expected outcomes for each method.
    Category Wired (Ethernet) Troubleshooting Wireless (Wi-Fi) Troubleshooting
    Primary Tools/Commands
    • ipconfig /all (Windows) or ifconfig (Linux/macOS) – Verify IP, subnet mask, and gateway.
    • ping [gateway] – Check local network connectivity (e.g., ping 192.168.1.1).
    • arp -a – Confirm MAC address resolution for the gateway.
    • Network Adapter Properties – Ensure "Ethernet" is enabled and set to "Automatic" for IP/DNS.
    • ipconfig /all or ifconfig – Check Wi-Fi adapter status, SSID, and signal strength.
    • ping [router_IP] – Verify connection to the router (e.g., ping 192.168.1.1).
    • Wi-Fi Analyzer Tools (e.g., inSSIDer, NetSpot) – Detect interference or weak signals.
    • Adapter Power Management – Disable "Energy Saving" modes in device Wi-Fi settings.
    Expected Outcomes
    • Valid IP address in the router’s subnet (e.g., 192.168.1.x).
    • Successful ping to gateway (0% packet loss).
    • No "Media disconnected" errors in adapter status.
    • SSID matches router name; signal strength > -70 dBm.
    • Ping to router IP succeeds; no "Request timed out" errors.
    • No overlapping channels with neighboring networks (2.4GHz).
    Common Hardware Checks
    • Replace Ethernet cable with a known-working one.
    • Test on a different Ethernet port or device.
    • Inspect for loose connections at the port or device.
    • Restart router or toggle Wi-Fi band (2.4GHz/5GHz).
    • Update Wi-Fi adapter drivers.
    • Move router closer to the device or use a Wi-Fi extender.

    Checklist for Router/Modem Power Cycles and Service Statuses

    Power cycling (rebooting) the router/modem resolves transient issues such as DHCP conflicts, firmware glitches, or ISP session timeouts. Below is a structured checklist to ensure comprehensive verification of hardware and service states.
    1. Power Cycle the Modem
      • Unplug the modem’s power adapter.
      • Wait 30 seconds to allow capacitors to discharge.
      • Reconnect power and wait 2–5 minutes for full reboot.
    2. Power Cycle the Router
      • Unplug the router’s power adapter (ensure modem is already rebooted).
      • Wait 30 seconds, then reconnect power.
      • Wait 1–2 minutes for the router to fully restart (check LED indicators).
    3. Verify ISP Service Status
      • Check the ISP’s official website or social media for outages in your area.
      • Contact ISP support via phone/chat if no outage is reported (provide modem serial number for diagnostics).
    4. Confirm Firmware Updates
      • Access the router’s admin panel (typically via 192.168.1.1 or 192.168.0.1).
      • Navigate to "Firmware Update" or "Administration" > "Upgrade."
      • Download the latest firmware from the manufacturer’s website if an update is pending.
    5. Test with a Different Device
      • Connect a secondary device (e.g., smartphone, tablet) to the same network.
      • If the secondary device connects, the issue is device-specific (e.g., driver, OS, or adapter failure).
    6. Inspect Physical Connections Between Modem and Router
      • Ensure the Ethernet cable between modem and router is securely plugged in.
      • Check for port LEDs on both devices (modem’s "LAN" port and router’s "WAN" port).
      • computer wont connect to internet - Ilustrasi 2

        Network connectivity issues frequently originate from outdated, corrupted, or incompatible network drivers or software configurations. These components act as intermediaries between the operating system and hardware, ensuring proper communication. When drivers malfunction, the system may fail to recognize network adapters, leading to disconnections or limited functionality. Resolving such issues involves systematic updates, reinstalls, or resets of drivers and network stacks, alongside leveraging built-in or third-party diagnostic tools to identify root causes.

        Effective driver management requires familiarity with operating system-specific tools, manufacturer utilities, and manual intervention methods. Below are structured approaches for Windows, macOS, and Linux, along with error-specific recovery steps, network stack reset procedures, and comparisons of diagnostic tools.

        Updating and Reinstalling Network Drivers Across Operating Systems

        Windows
        The Device Manager in Windows provides direct access to network adapter drivers, allowing users to update, roll back, or reinstall them. For advanced users, PowerShell or Command Prompt can automate driver updates via Windows Update or manufacturer-provided packages.

        macOS
        macOS relies on Apple’s built-in driver framework, which automatically updates drivers through system software updates. Manual intervention is limited but can include reinstalling drivers via terminal commands or resetting System Management Controller (SMC) settings.

        Linux
        Linux distributions use kernel modules for hardware support. Drivers can be updated via package managers (e.g., `apt`, `dnf`, `pacman`) or manually compiled from source. Tools like `dkms` (Dynamic Kernel Module Support) assist in managing third-party drivers.

        Best Practice: Always back up critical system files before modifying drivers, especially in Windows, where incorrect driver versions may cause system instability.

        Common Network Driver Errors and Recovery Steps

        Driver-related errors in Windows are often accompanied by specific error codes (e.g., Code 10, Code 43) that indicate hardware or driver conflicts. Below is a table outlining common errors, their causes, and recovery methods:
        Error Code Description Manual Fix Automated Fix
        Code 10 Device cannot start (typically due to driver conflicts or hardware issues).
        • Uninstall and reinstall the driver via Device Manager.
        • Update the driver using Windows Update or manufacturer software.
        • Check for hardware failures (e.g., loose connections, faulty adapters).
        • Use Driver Booster or Snappy Driver Installer to scan and update drivers.
        • Run Windows Update Troubleshooter (Settings > Update & Security > Troubleshoot).
        Code 43 Device experienced a problem and was uninstalled (common with USB/Wi-Fi adapters).
        • Disable and re-enable the device in Device Manager.
        • Update to the latest driver version from the manufacturer’s website.
        • Check for Windows updates (some drivers require OS updates).
        • Use Windows Hardware Troubleshooter (Settings > Update & Security > Troubleshoot).
        • Automated tools like Driver Easy can detect and reinstall problematic drivers.
        Code 31 Device is missing a required .inf file (driver configuration issue).
        • Reinstall the driver using the original installation media.
        • Manually locate and replace the missing .inf file in the driver folder.
        • Use System File Checker (SFC) to repair corrupted system files.
        • Third-party tools like DriverPack Solution can restore missing driver files.
        Code 39 Driver is unsigned or blocked by Windows.
        • Temporarily disable driver signature enforcement (via Group Policy or boot options).
        • Obtain a signed driver from the manufacturer.
        • Use Windows Update to push a signed driver update.
        • Automated tools like Driver Talent can bypass signature checks.
        Note: Automated tools may not always provide the most stable driver versions. Manual updates from manufacturer websites are recommended for critical hardware (e.g., Wi-Fi cards, Ethernet adapters).

        Resetting Network Stacks via Command Line

        Network stack resets force the operating system to reload network configurations, often resolving transient issues caused by corrupted settings or driver conflicts. Below are command sequences for Windows, macOS, and Linux:

        Windows (Command Prompt as Administrator)
        Reset TCP/IP stack and flush DNS cache:

        netsh int ip reset
        netsh winsock reset
        ipconfig /flushdns

        Explanation:

      • `netsh int ip reset` – Resets TCP/IP stack to default settings.
      • `netsh winsock reset` – Resets Winsock catalog (used for network communication).
      • `ipconfig /flushdns` – Clears DNS resolver cache, which may contain outdated entries.
      • macOS (Terminal with sudo privileges)
        Reset network interface (replace `en0` with your active interface):

        sudo ifconfig en0 down
        sudo ifconfig en0 up

        Explanation:

      • `ifconfig en0 down` – Temporarily disables the network interface.
      • `ifconfig en0 up` – Re-enables the interface, forcing a fresh connection initialization.
      • Linux (Debian/Ubuntu)
        Restart networking service or reload interfaces:

        sudo systemctl restart networking

        OR for systems using Netplan (Ubuntu 17.10+)

        sudo netplan apply

        Explanation:

      • `systemctl restart networking` – Restarts the networking service, applying new configurations.
      • `netplan apply` – Reapplies network configurations defined in `/etc/netplan/`.
      • Caution: Incorrect commands (e.g., disabling the wrong interface in macOS/Linux) may cause temporary network loss. Verify interface names using `ifconfig` (macOS/Linux) or `ipconfig` (Windows) before executing.

        Comparison of Built-in and Third-Party Network Troubleshooting Tools

        Built-in OS tools and third-party utilities offer varying levels of effectiveness in diagnosing and resolving driver-related issues. Below is a comparative analysis:
        Tool Platform Functionality Effectiveness Limitations
        Windows Network Adapter Troubleshooter Windows
        • Scans for hardware/driver conflicts.
        • Attempts automatic fixes (e.g., driver updates, service restarts).
        Moderate (works for common issues but may miss advanced conflicts).
        • Limited to Microsoft-certified drivers.
        • May not detect third-party driver corruption.
        macOS Network Diagnostics macOS
        • Checks for DNS, DHCP, and hardware issues.
        • Provides logs for manual review.
        High (comprehensive for Apple hardware).
        • No direct driver update capability.
        • Requires manual interpretation of logs for non

          Network Configuration and IP/DNS Settings

          Network connectivity issues often stem from misconfigured IP or DNS settings, which disrupt the device’s ability to communicate with the router or resolve domain names. Manual configuration of these settings—whether static or DHCP-based—can resolve conflicts, improve performance, or ensure compatibility with specialized devices like servers or IoT systems. Additionally, DNS servers act as intermediaries between devices and websites, and selecting reliable alternatives (e.g., Google DNS, Cloudflare) can mitigate latency or censorship. This section provides structured guidance on configuring IP/DNS settings, diagnosing conflicts, and optimizing router configurations to restore internet access.

          Manual IP Configuration (Static vs. DHCP)

          Devices typically obtain IP addresses automatically via DHCP (Dynamic Host Configuration Protocol), but static IP assignments are necessary for devices requiring fixed addresses, such as servers, network printers, or IoT devices with reserved ports. A static IP ensures consistent access and simplifies port forwarding or remote management.

          Steps to Configure Static IP (Windows/macOS/Linux):

        • Windows:
        • 1. Navigate to Control Panel > Network and Sharing Center > Change adapter settings.
          2. Right-click the active connection and select Properties.
          3. Highlight Internet Protocol Version 4 (TCP/IPv4) and click Properties.
          4. Select Use the following IP address and enter:
        • IP Address: `192.168.1.100` (adjust per router’s subnet, e.g., `192.168.1.x`).
        • Subnet Mask: `255.255.255.0` (default for most home networks).
        • Default Gateway: Router’s IP (e.g., `192.168.1.1`).
        • Preferred DNS Server: `8.8.8.8` (Google) or `1.1.1.1` (Cloudflare).
        • 5. Click OK to apply.

          - macOS:
          1. Go to System Preferences > Network.
          2. Select the active connection (e.g., Wi-Fi/Ethernet) and click Advanced.
          3. Navigate to the TCP/IP tab and set Configure IPv4 to Manually.
          4. Enter the static IP, subnet mask, router, and DNS as above, then click OK.

          - Linux (via terminal):

          sudo nano /etc/netplan/01-netcfg.yaml # Adjust filename per distribution

          Add the following (example for Ubuntu):

          network:
          version: 2
          ethernets:
          eth0:
          addresses: [192.168.1.100/24]
          gateway4: 192.168.1.1
          nameservers:
          addresses: [8.8.8.8, 1.1.1.1]

          Apply changes:

          sudo netplan apply

          When to Use Static IPs:

        • Servers: Web, FTP, or database servers require static IPs for consistent domain resolution.
        • IoT Devices: Smart cameras or NAS devices often need reserved IPs to avoid DHCP reassignment.
        • Port Forwarding: Gaming consoles or VPN routers rely on static IPs for port mapping.
        • Network Printers: Ensures seamless printing without IP changes.
        • DNS Configuration and Common Servers

          DNS (Domain Name System) translates human-readable domain names (e.g., `google.com`) into IP addresses. Public DNS servers like Google (`8.8.8.8`) or Cloudflare (`1.1.1.1`) can improve speed, privacy, or bypass regional restrictions. Misconfigured DNS settings may cause connection timeouts or incorrect website redirections.

          Common Public DNS Servers:

          Provider Primary DNS Secondary DNS Use Case
          Google 8.8.8.8 8.8.4.4 Fast resolution, widely used.
          Cloudflare 1.1.1.1 1.0.0.1 Privacy-focused, low latency.
          OpenDNS 208.67.222.222 208.67.220.220 Content filtering (family-friendly).
          Quad9 9.9.9.9 149.112.112.112 Security-focused, blocks malicious domains.
          Switching DNS Servers (Windows/macOS/Linux):
        • Windows:
        • 1. Follow the same path as static IP configuration (TCP/IPv4 Properties).
          2. Under Use the following DNS server addresses, enter preferred/alternate DNS (e.g., `8.8.8.8` and `8.8.4.4`).
          3. Check Validate settings upon exit and click OK.

          - macOS:
          1. In Network > Advanced > DNS, click + to add DNS servers (e.g., `1.1.1.1`).
          2. Remove default DNS (e.g., ISP-provided) if desired, then click OK.

          - Linux:
          Edit `/etc/resolv.conf` (temporary) or configure via `netplan`/`nmcli` (permanent):

          sudo nano /etc/resolv.conf

          Add:

          nameserver 1.1.1.1
          nameserver 8.8.8.8

          For persistence (Ubuntu/Debian):

          sudo systemd-resolve --set-dns=1.1.1.1 --interface=eth0

          Flushing DNS Cache:
          Corrupted DNS cache may cause outdated or incorrect resolutions. Clear it with:

        • Windows:
        • ipconfig /flushdns

          - macOS:

          sudo dscacheutil -flushcache
          sudo killall -HUP mDNSResponder

          - Linux:

          sudo systemd-resolve --flush-caches

          OR (older systems)

          sudo service nscd restart

          Resetting TCP/IP Stack and Network Settings

          Persistent connectivity issues may arise from corrupted TCP/IP stack or outdated network configurations. Resetting these components can restore proper communication between the device and network.

          Windows Command Line Reset:
          1. Open Command Prompt as Administrator.
          2. Execute the following commands in sequence:

          netsh winsock reset
          netsh int ip reset
          ipconfig /flushdns

          3. Reboot the device to apply changes.

          macOS Terminal Commands:
          1. Open Terminal and run:

          sudo dscacheutil -flushcache
          sudo killall -HUP mDNSResponder
          sudo discoveryutil mdnsflushcache

          2. Reset network settings (macOS Ventura+):

          sudo networksetup -setdhcp Wi-Fi

          (Replace `Wi-Fi` with the active interface name.)

          Linux (Ubuntu/Debian):
          1. Restart networking services:

          sudo systemctl restart systemd-networkd

          2. Reset IP tables (if firewall interference is suspected):

          sudo iptables -F
          sudo iptables -X
          sudo ip6tables -F
          sudo ip6tables -X

          Verification:
          After resetting, verify connectivity with:

          ping 8.8.8.8
          nslookup google.com

          Successful pings and DNS resolution confirm the fix.

          Diagnosing and Resolving IP Conflicts

          An IP conflict occurs when two devices on the same network attempt to use the same static or dynamically assigned IP, disrupting communication. Symptoms include intermittent connectivity, slow speeds, or complete disconnection. Tools like `arp -a` (Windows) or router DHCP logs can identify conflicting devices.

          Detecting IP Conflicts:

        • Windows:
        • arp -a

          Look for

          Router and Modem Hardware Diagnostics

          Hardware diagnostics for routers and modems are critical when software troubleshooting fails to restore internet connectivity. Physical issues—such as misconfigured ports, firmware corruption, or hardware degradation—often manifest as intermittent disconnections, LED anomalies, or complete failure to establish a WAN link. This section covers systematic methods to reset hardware, interpret LED indicators, test physical connections, assess damage, and analyze system logs for root causes. Proper diagnostics ensure accurate identification of whether the issue stems from a temporary configuration error or permanent hardware failure.

          Hardware Reset Procedures for Routers and Modems

          Resetting a router or modem restores default settings, clears temporary configurations, and can resolve persistent connectivity issues. Two primary reset methods exist: soft resets (reboot) and hard resets (factory reset). A soft reset interrupts power briefly without altering configurations, while a hard reset erases all settings, including Wi-Fi passwords, firewall rules, and port forwarding.

          Differentiating Reset Types:

        • Soft Reset (Reboot):
        • Steps:
        • 1. Unplug the power cable from the router/modem.
          2. Wait 30–60 seconds to ensure all components discharge.
          3. Reconnect power and allow 2–5 minutes for full initialization.
        • Use Case: Resolves transient issues like DHCP leases, ARP cache corruption, or minor firmware glitches.
        • Impact: Preserves all user configurations (SSID, VPN settings, etc.).
        • - Hard Reset (Factory Default):

        • Steps:
        • 1. Locate the reset button (typically a small recessed button on the back or underside).
          2. Use a paperclip or pin to press and hold the button for 10–15 seconds.
          3. Release the button and wait 2–3 minutes for reboot.
        • Use Case: Required for severe firmware corruption, forgotten admin passwords, or when all configurations must be reverted.
        • Impact: All settings are erased; the device reverts to out-of-box state.
        • Web Interface Reset (Alternative Method):
          Some routers (e.g., TP-Link, Netgear) offer a factory reset via the admin panel under Administration > Factory Default. This method avoids physical button access but requires administrative privileges.

          Warning: A hard reset disables all custom configurations. Backup critical settings (e.g., port forwarding rules, static IP assignments) before proceeding.

          Interpreting Router LED Indicators

          LED status lights provide real-time diagnostics for connection health, traffic activity, and hardware faults. Below is a standardized table for common router LEDs, including troubleshooting steps for abnormal states. Note that LED meanings vary by manufacturer; consult the device manual for model-specific details.
          LED Label Normal State Abnormal State Possible Causes Troubleshooting Steps
          Power Solid green/white Off / Blinking rapidly
          • Power supply failure (faulty outlet, surge protector, or cable).
          • Internal power regulator damage.
          • Overheating shutdown.
          • Check power source with a multimeter (12V/19V DC for most modems).
          • Test with a known-working power adapter.
          • Inspect for overheating (touch vents; if hot, allow cooling or replace).
          WAN (Internet) Solid green/white
          • Off
          • Blinking slowly
          • Amber/orange
          • Off: No WAN cable connected or ISP outage.
          • Blinking slowly: Syncing with ISP or weak signal.
          • Amber: Authentication failure, MAC filtering, or ISP block.
          • Verify WAN cable connection (replace with a known-working cable).
          • Check ISP status via Downdetector or provider portal.
          • Reset modem (soft/hard) and reconfigure WAN settings.
          • Disable MAC filtering in router settings.
          LAN (Ethernet) Solid green/white
          • Off
          • Blinking intermittently
          • Off: Port disabled or cable unplugged.
          • Intermittent blinking: Faulty cable, port failure, or device power cycling.
          • Test with a different Ethernet cable and port.
          • Replace the LAN cable if blinking persists.
          • Check connected device (e.g., PC) for network adapter errors.
          Wi-Fi Solid blue/white
          • Off
          • Blinking rapidly
          • Off: Wi-Fi disabled in settings or hardware failure.
          • Rapid blinking: Driver issues, channel interference, or overheating.
          • Enable Wi-Fi via admin panel.
          • Change Wi-Fi channel to 5GHz (less crowded).
          • Update router firmware.
          • Inspect for physical damage (e.g., bent antennas).
          DSL/Internet (Modem-Specific) Solid green
          • Amber
          • Blinking erratically
          • Amber: DSL sync failure (line issues, incorrect VPI/VCI).
          • Erratic blinking: Line noise, faulty DSL filter, or ISP provisioning error.
          • Reseat the DSL phone cable and filter.
          • Check VPI/VCI settings (contact ISP for correct values).
          • Test with a different DSL modem.
          Pro Tip: If multiple LEDs exhibit abnormal behavior simultaneously (e.g., WAN and LAN blinking amber), the issue likely lies with the ISP connection or modem hardware. Isolate the problem by testing with a different modem or ISP-provided replacement unit.

          Testing Router Ports with Loopback Plugs and Direct Connections

          Physical port failures—whether on the WAN, LAN, or modem interfaces—can mimic software issues like "no internet" or "limited connectivity." Direct testing methods validate port functionality without relying on external devices.

          Method 1: Loopback Plug Test for Ethernet/WAN Ports
          A loopback plug (also called a "null modem" or "test plug") creates a closed circuit between transmit (TX) and receive (RX) pins, simulating a connected device. Most routers support this for LAN/WAN ports.

          - Steps:
          1. Obtain a loopback plug (or create one using a RJ45 crimper and pins 1, 2, 3, and 6 shorted).
          2. Insert the plug into the suspected faulty port (e.g., WAN or LAN).
          3. Check the LED status:

        • Solid light: Port is physically functional

          Resolving a computer’s inability to connect to the internet requires a methodical approach that balances technical precision with adaptability. From verifying basic hardware connections to dissecting intricate router logs, each diagnostic step narrows the scope of potential failures, ensuring targeted fixes. The integration of command-line tools, driver recovery procedures, and network configuration adjustments underscores the importance of a multi-layered troubleshooting framework. By mastering these techniques, users gain not only immediate solutions but also the confidence to navigate future connectivity challenges with systematic efficiency. Ultimately, the key lies in patience, attention to detail, and the willingness to explore both obvious and obscure sources of disruption.

        Leave a Comment

        Comments are moderated before appearing. The data you submit is processed according to the Privacy Policy of www.linuxunplugged.com.