Boiling Frozen Chicken Science Practical Nutrition Guide

Table of Contents
- Biochemical and Thermal Dynamics of Boiling Frozen Chicken: Safety and Food Science Foundations
- Protein Denaturation and Moisture Migration in Frozen vs. Thawed Chicken
- Heat Transfer Efficiency: Ice Crystals and Thermal Resistance
- Pathogen Survival and Cross-Contamination Risks: Comparative Analysis
- Practical Cooking Methods and Adaptations for Boiling Frozen Chicken
- Modified Boiling Techniques for Frozen Chicken
- Procedural Flowchart for Boiling Frozen Chicken
- Texture and Flavor Comparisons: Frozen vs. Thawed Boiled Chicken
- Nutritional and Culinary Impact of Boiling Frozen Chicken
- Nutritional Comparisons Between Boiling and Alternative Cooking Methods
- Water Temperature Gradients and Their Impact on Cooking Efficiency
- Pros and Cons of Boiling Frozen Chicken for Meal Prep
- Five Adaptable Recipes Leveraging Boiled Frozen Chicken
- Equipment and Environmental Factors in Boiling Frozen Chicken
- Optimal Pot Types for Boiling Frozen Chicken
- Impact of Altitude and Humidity on Boiling Dynamics
- Repurposing Household Tools for Small-Batch Boiling
- Step-by-Step Setup for Slow Cooker or Instant Pot Boiling
Boiling frozen chicken presents a unique intersection of food science and culinary efficiency, challenging conventional cooking practices while offering distinct advantages in meal preparation. The process triggers critical biochemical transformations—protein denaturation and moisture redistribution—that differ markedly from thawed poultry, influencing both safety and texture outcomes. Understanding these dynamics is essential for achieving consistent results, particularly when balancing speed with pathogen elimination and flavor retention. This exploration examines the underlying mechanisms, practical adaptations, and nutritional implications of boiling frozen chicken, supported by empirical data and expert recommendations.
From the perspective of food safety, boiling frozen chicken introduces variables such as uneven heat distribution due to ice crystals and prolonged exposure to suboptimal temperatures, which may extend the window for bacterial survival. Comparative analyses reveal how traditional thawing methods fare against direct boiling, particularly in terms of internal temperature progression and cross-contamination risks. Meanwhile, culinary applications benefit from the method’s efficiency, particularly in high-volume meal prep where time and resource optimization are priorities. By dissecting these elements—science, technique, and utility—this guide equips home cooks and professionals with actionable insights to leverage boiling frozen chicken effectively.

Biochemical and Thermal Dynamics of Boiling Frozen Chicken: Safety and Food Science Foundations
Boiling frozen chicken introduces unique challenges in heat transfer, protein stability, and microbial inactivation due to the presence of ice crystals and reduced thermal conductivity. Unlike thawed meat, frozen chicken exhibits distinct biochemical responses—such as delayed protein denaturation and uneven moisture migration—while its internal temperature progression diverges significantly from conventional cooking methods. Understanding these mechanisms is critical for ensuring food safety, as pathogen survival rates and cross-contamination risks vary based on thermal exposure and structural integrity of the muscle tissue.The biochemical alterations in frozen chicken during boiling stem from the interplay between phase transitions (ice-to-water) and collagen/actin-myosin denaturation. Ice crystals disrupt cellular membranes and myofibrillar networks, creating microchannels that alter heat penetration rates. Meanwhile, prolonged exposure to suboptimal temperatures (e.g., <60°C) can stabilize pathogenic bacteria like Salmonella and Campylobacter in the "danger zone" (5–60°C), where replication occurs unchecked. Below, the thermal gradients and safety trade-offs of boiling frozen chicken are analyzed through empirical data and structural mechanics.
Protein Denaturation and Moisture Migration in Frozen vs. Thawed Chicken
The denaturation of myofibrillar proteins (actin and myosin) in chicken during boiling follows a two-phase kinetic model: initial unfolding at 40–50°C (reversible) and irreversible coagulation at 60–70°C. In frozen chicken, ice crystals delay denaturation onset by up to 10–15 minutes due to latent heat absorption during phase change. This lag increases the window for moisture migration, where intracellular water is expelled as ice melts, reducing juiciness and accelerating surface drying—a phenomenon quantified in studies by Sun and Holley (2010) using differential scanning calorimetry (DSC).Key observations include:
Heat Transfer Efficiency: Ice Crystals and Thermal Resistance
The presence of ice crystals in frozen chicken reduces effective thermal conductivity by 30–50% compared to thawed meat, as ice’s conductivity (2.3 W/m·K) is lower than water’s (0.6 W/m·K). This inefficiency manifests in three critical stages:1. Initial Latent Heat Absorption (0–5 min): Heat energy is prioritized for ice melting, creating a thermal barrier that slows core temperature rise.
2. Microchannel Formation (5–15 min): As ice melts, interconnected pores form, enhancing heat transfer but also trapping steam, which insulates the core.
3. Steady-State Conduction (15–30 min): Once fully thawed, heat transfer resembles thawed chicken, but residual ice pockets may persist in dense muscle regions (e.g., thighs), leading to undercooked centers if boiling is halted prematurely.
Empirical Data on Temperature Progression:
| Time (min) | Frozen Chicken Core (°C) | Thawed Chicken Core (°C) | Surface (°C) | Heat Transfer Rate (W/m²) | |
|---|---|---|---|---|---|
| 5 | 42 | 55 | 85 | 450 (frozen), 680 (thawed) | |
| 10 | 50 | 65 | 95 | 520 | 750 |
| 15 | 58 | 72 | 100 | 580 | 800 |
| 20 | 65 | 78 | 100 | 600 | 820 |
Risks of Uneven Cooking:
Pathogen Survival and Cross-Contamination Risks: Comparative Analysis
Boiling frozen chicken alters pathogen inactivation kinetics due to extended sublethal temperature exposure and physical disruption of bacterial cells by ice crystals. Below is a comparative table of Campylobacter jejuni and Salmonella enterica survival under three methods, based on FDA and USDA guidelines (2020).| Method | Temperature Threshold for Pathogen Death (°C) | Time to Reach Safe Internal Temp (71.1°C) (minutes) | Risk of Cross-Contamination (Scale: Low/Medium/High) | Key Limitation |
|---|---|---|---|---|
| Boiling Frozen Chicken |
|
25–40 minutes (core) | High (ice melt releases bacteria into cooking water) | Prolonged exposure to 5–60°C increases toxin production (e.g., Staphylococcus aureus enterotoxins) |
| Thawed in Fridge (4°C for 24h) | 60–65°C (Salmonella: 0.8 min D-value; Campylobacter: 0.5 min) | 12–18 minutes | Medium (juices may drip onto surfaces) | Slow thawing may not fully inactivate Listeria monocytogenes if present |
| Submerged in Cold Water (≤4°C, ≤2h) | 60°C (same as fridge-thawed) | 15–22 minutes | High (water contamination if not sanitized) | Rapid thawing can create partial thawing zones, harboring pathogens |
Practical Cooking Methods and Adaptations for Boiling Frozen Chicken
Boiling frozen chicken requires deliberate modifications to traditional cooking techniques to ensure food safety, even heat distribution, and optimal texture. Unlike thawed poultry, frozen chicken presents unique challenges such as uneven cooking due to ice formation, prolonged exposure to suboptimal temperatures, and potential moisture loss during phase transitions. Adaptations in preparation, boiling parameters, and doneness verification are critical to achieving results comparable to conventionally cooked chicken while mitigating risks of undercooking or overcooking. This section explores evidence-based modifications, procedural workflows, and comparative outcomes between frozen and thawed boiling methods.Modified Boiling Techniques for Frozen Chicken
Standard boiling methods for thawed chicken—such as simmering in shallow water or using a 1:1 water-to-chicken ratio—are ineffective for frozen poultry due to the insulating effect of ice and the prolonged time required to reach core temperatures. Three primary adaptations address these limitations: partial thawing, water depth adjustments, and pre-scaling. Each technique influences heat transfer efficiency, crust formation, and moisture retention.Partial Thawing
Partial thawing (e.g., refrigeration for 12–24 hours or submerging sealed packages in cold water for 30–60 minutes) reduces ice encasement, allowing water to penetrate more effectively. However, partial thawing must be balanced to avoid surface drying or bacterial proliferation in the "danger zone" (4°C–60°C/40°F–140°F). Studies indicate that chicken partially thawed to a center temperature of –1°C to 0°C (30°F–32°F) achieves a 30–40% reduction in boiling time while maintaining microbial safety (USDA, 2015).
Water Depth Adjustments
Increasing water depth to 3–4 times the chicken’s height (e.g., 10–15 cm/4–6 inches for breasts) ensures complete submersion and uniform heat distribution. Shallow boiling traps steam, creating localized hot spots that may overcook outer surfaces before internal temperatures reach safety thresholds. Conversely, excessive water (e.g., >5 times the chicken’s volume) dilutes heat, prolonging cooking. Optimal depth also minimizes foam buildup, which can insulate the chicken and impede heat penetration.
Pre-Scaling
Pre-scaling involves blanching frozen chicken in boiling water for 1–2 minutes before adjusting to a simmer (70–80°C/158°F–176°F). This step:
Procedural Flowchart for Boiling Frozen Chicken
A structured workflow ensures consistency in safety and quality. Below is a step-by-step outline with critical decision points, formatted for practical application.Preparation Steps
Pre-boiling preparation directly impacts texture and safety. Key actions include:
Boiling Parameters
Accurate control of water temperature, volume, and agitation is essential. Recommended settings:
| Parameter | Frozen Chicken (Breasts/Thighs) | Thawed Chicken (Comparison) |
|---|---|---|
| Water-to-Chicken Ratio | 3:1 to 4:1 (volume) | 2:1 (standard for thawed) |
| Initial Boil Temperature | 100°C (212°F) for 1–2 min (pre-scaling) | N/A (simmer from start) |
| Simmer Temperature | 70–80°C (158–176°F) | 75–85°C (167–185°F) |
| Lid Use | Partially covered (1–2 cm gap) to allow steam escape | Covered (reduces evaporation) |
| Cooking Time Adjustment | +50–75% longer than thawed (e.g., 30–40 min for breasts) | 18–25 min (breasts), 40–50 min (thighs) |
Visual cues (e.g., color, clarity of juices) are unreliable for frozen chicken due to uneven heating. Core temperature verification is mandatory:
Texture and Flavor Comparisons: Frozen vs. Thawed Boiled Chicken
Boiling frozen chicken yields distinct textural and flavor profiles compared to thawed counterparts, primarily due to moisture dynamics and crust formation. Key differences include:Moisture Retention
Crust Formation
Flavor Profile
Real-World Example:
A study by Poultry Science (2017) compared boiled frozen vs. thawed chicken breasts in institutional kitchens. Frozen samples required 35% longer cooking time but achieved 78% consumer acceptance when brined pre-freezing, compared to 89% for thawed samples. The primary trade-off was texture rather than safety.
Key Recommendation: Boil frozen chicken in water depths of 3–4 times the chicken’s height, using a pre-scaling step and verifying doneness via core temperature (74°C/165°F).
Nutritional and Culinary Impact of Boiling Frozen Chicken
Boiling frozen chicken presents a unique balance between nutritional retention, culinary efficiency, and adaptability in meal preparation. Unlike methods such as grilling or baking, which rely on direct heat transfer and dry conduction, boiling leverages immersion in water to achieve even cooking while preserving water-soluble nutrients. This method is particularly advantageous for large-scale meal prep, where time constraints and resource optimization are critical. However, the nutritional and textural outcomes differ significantly depending on water temperature gradients, cooking duration, and the type of cut used. Below, the nutritional distinctions between boiling frozen chicken and alternative cooking methods are examined, followed by a comparative analysis of its practical advantages and limitations in culinary applications.
Nutritional Comparisons Between Boiling and Alternative Cooking Methods
The nutritional profile of chicken varies markedly based on cooking technique, primarily due to differences in heat transfer, moisture loss, and nutrient solubility. Boiling frozen chicken retains a higher proportion of water-soluble vitamins (e.g., B vitamins like thiamine, riboflavin, and niacin) and minerals (e.g., phosphorus, potassium, and selenium) compared to dry-heat methods such as grilling or baking. This occurs because water acts as a medium that minimizes oxidation and leaching of these nutrients into the air or fat. However, boiling also results in greater fat solubility losses, particularly for fat-soluble vitamins (A, D, E, and K), which migrate into the cooking water unless skimming or rendering techniques are employed.In contrast, grilling or baking frozen chicken enhances flavor through Maillard reactions and caramelization but may degrade heat-sensitive nutrients like vitamin C and certain B vitamins due to prolonged exposure to high temperatures. Additionally, dry-heat methods increase the risk of forming harmful compounds (e.g., heterocyclic amines) if the surface is over-charred. The following table summarizes the key nutritional trade-offs:
Key Consideration:
Nutritional Factor Boiling Frozen Chicken Grilling/Baking Frozen Chicken Protein Quality Retains ~95% of protein due to minimal denaturation in water. Slightly lower protein retention (~90-93%) due to surface browning and moisture loss. Fat Solubility Fat-soluble vitamins (A, D, E, K) leach into water; can be mitigated by skimming. Higher retention of fat-soluble vitamins in the meat, but risk of oxidation if fat is exposed to high heat. Water-Soluble Vitamins Superior retention (B vitamins, vitamin C) due to immersion. Significant loss (up to 30%) of B vitamins and vitamin C from surface exposure. Mineral Retention Retains ~90-95% of minerals (e.g., phosphorus, selenium). Retains ~85-90%, with potential loss of potassium through evaporation. Antioxidant Formation Minimal; relies on natural antioxidants in chicken. Increased formation of beneficial antioxidants (e.g., from Maillard products) but potential for harmful compounds if overcooked. Boiling frozen chicken optimizes retention of water-soluble nutrients and protein integrity but requires active management of fat and mineral solubility to maximize nutritional yield.Water Temperature Gradients and Their Impact on Cooking Efficiency
The temperature of boiling water directly influences the speed, tenderness, and nutrient retention of frozen chicken. Ideal gradients balance thermal conductivity with enzymatic activity to prevent toughness while minimizing nutrient degradation. Research indicates that:
80–90°C (176–194°F): Slower cooking but preserves texture and maximizes nutrient retention, particularly for B vitamins and minerals. Suitable for delicate cuts like breasts but may require extended durations (45–60 minutes) for full thawing and cooking. 95–100°C (203–212°F): Accelerates cooking (25–40 minutes for thighs, 30–45 minutes for breasts) but risks overcooking collagen-rich cuts (e.g., drumsticks) into toughness. Nutrient leaching into water increases, particularly for fat-soluble compounds. Simmering (90–95°C): Optimal for frozen chicken to maintain moisture and tenderness while ensuring even heat distribution. This method reduces energy consumption compared to full boiling and is ideal for meal prep where batch cooking is required. Illustration of Ideal Temperature Profiles:
Phase 1 (0–15 min): Gradual thawing at 80–85°C to prevent surface freezing and uneven cooking. Phase 2 (15–30 min): Active cooking at 90–95°C to achieve core temperatures of 74°C (165°F) for safety. Phase 3 (30–45 min): Simmering at 90°C for collagen breakdown (critical for tougher cuts like thighs or drumsticks). Critical Formula for Boiling Time Estimation:
Cooking Time (minutes) ≈ (Initial Frozen Mass in kg × 1.5) + (Cut-Specific Adjustment Factor)
Adjustment Factors:Breasts: +10 min (delicate texture) Thighs/Drumsticks: +5 min (collagen-rich) Wings: +15 min (bone density) Pros and Cons of Boiling Frozen Chicken for Meal Prep
Boiling frozen chicken is a cornerstone of efficient meal prep, offering distinct advantages in nutrient retention, time management, and recipe versatility. However, its practicality depends on specific culinary goals, budget constraints, and resource availability. The following table evaluates its suitability across key meal prep dimensions:
Optimal Use Cases:
Category Pros Cons Nutrient Retention Preserves ~90-95% of B vitamins and ~85-90% of minerals; minimal oxidation. Fat-soluble vitamins (A, D, E, K) leach into water; requires skimming or rendering. Meal Prep Efficiency Eliminates thawing time (25–40% faster than thawed cooking); ideal for batch prep. Longer cooking duration (30–60 min vs. 20–30 min for thawed); higher energy use. Versatility in Recipes Excels in soups, stews, salads, and braised dishes; tenderizes collagen for shredding. Limited for crispy or charred dishes (e.g., grilled skewers, roasted skin); texture differs. Cost Considerations Lower energy cost than baking/grilling (water conducts heat efficiently). Water waste (~1–2 liters per batch); environmental impact if not recycled. Safety Ensures uniform internal temperature (74°C core), reducing bacterial risks. Cross-contamination risk if water is reused without sanitization. Boiling frozen chicken is most advantageous in high-volume meal prep (e.g., workplace lunches, family dinners) where nutrient density and time savings outweigh texture preferences. For recipes requiring crispiness or caramelization, a hybrid approach (e.g., boiling followed by pan-searing) is recommended.Five Adaptable Recipes Leveraging Boiled Frozen Chicken
Boiling frozen chicken simplifies preparation for dishes where texture and flavor can be further developed post-cooking. The following recipes highlight its role in reducing prep time while enhancing meal complexity:1. One-Pot Chili (Frozen Thighs)
Method: Simmer frozen thighs in broth for 40 minutes at 90°C, then shred and combine with spices, beans, and tomatoes. Boiling pre-cooks the meat without thawing, reducing active time by 20 minutes. Nutritional Note: Retains ~92% of protein and 88% of iron compared to thawed cooking. 2. Creamy Chicken and Rice Soup (Frozen Breasts)
Method: Boil frozen breasts for 35 minutes at 85°C to avoid toughness, then dice and blend into a creamy base with garlic, celery, and rice. Ideal for bulk cooking (6–8 servings). Efficiency Gain: Eliminates 1-hour thawing time and 15 minutes of active prep. 3. Shredded Chicken Tacos (Frozen Drumsticks)
Method: Boil frozen drumsticks for 50 minutes at 90°C, then shred for tacos. The collagen breakdown from boiling yields 30% more tender meat than Equipment and Environmental Factors in Boiling Frozen Chicken
Boiling frozen chicken requires careful consideration of both equipment selection and environmental conditions to ensure safety, efficiency, and optimal cooking outcomes. The choice of pot material, shape, and capacity directly influences heat distribution, energy retention, and risk of cross-contamination. Meanwhile, environmental factors such as altitude and humidity alter boiling dynamics by affecting water temperature, pressure, and evaporation rates. This section examines the technical specifications of ideal cookware, the physiological adjustments needed for varying climates, and practical adaptations for small-scale or repurposed tools to maintain consistency in texture and safety.
Optimal Pot Types for Boiling Frozen Chicken
The selection of cookware significantly impacts the uniformity of cooking and the preservation of nutritional integrity in frozen chicken. Heavy-bottomed stainless steel or enameled cast iron pots are preferred due to their superior heat retention and even distribution, which prevents hot spots that could lead to uneven cooking or localized overcooking. Conversely, non-stick pots are unsuitable for boiling frozen chicken because their lower heat tolerance and potential for leaching of non-stick coatings (e.g., PTFE) under prolonged exposure to high temperatures compromise both safety and flavor. Additionally, copper pots, while excellent conductors, require frequent relining and are prone to reacting with acidic marinades or brines, which may alter the chicken’s pH and texture.
Key Material Properties for Boiling Frozen Chicken:The shape and capacity of the pot also play critical roles. A wide, shallow pot (e.g., 10–12 inches in diameter) maximizes surface area exposure, reducing cooking time and preventing steam buildup that could lead to uneven thawing. Conversely, a narrow, deep pot (e.g., stockpot) may trap steam, prolonging the process and increasing energy consumption. For standard frozen chicken breasts (e.g., 200–300g per piece), a pot with a 2:1 or 3:1 ratio of water to chicken volume is optimal, ensuring sufficient immersion without excessive water loss.
Stainless steel (18/10 grade): Corrosion-resistant, retains heat uniformly, and inert to acidic or alkaline foods. Enameled cast iron: Non-reactive surface with high heat capacity; ideal for long simmering times. Aluminum: Lightweight but prone to warping; best for short boiling periods if anodized. Avoid: Non-stick coatings (thermal degradation risk), thin or warped aluminum, and copper without proper lining.
Impact of Altitude and Humidity on Boiling Dynamics
Altitude and humidity directly influence the boiling point of water and the thermal conductivity of the cooking environment, necessitating adjustments to boiling times and techniques for frozen chicken. At higher altitudes (above 1,500 meters or 5,000 feet), atmospheric pressure decreases, lowering the boiling point of water by approximately 0.5°C per 150 meters (500 feet). This reduction in temperature slows heat transfer, extending cooking times by 10–20% depending on elevation. For example, at 3,000 meters (10,000 feet), water boils at ~90°C (194°F) instead of 100°C (212°F), requiring an additional 15–25 minutes to achieve the same internal temperature (74°C/165°F) in frozen chicken.
Adjustments for Altitude:Humidity further complicates boiling efficiency by affecting evaporation rates and steam retention. In high-humidity environments (e.g., tropical climates with >70% relative humidity), water evaporates more slowly, leading to longer simmering times and potential overcooking if not monitored. Conversely, low-humidity conditions accelerate evaporation, requiring additional water to be added during cooking to maintain immersion and prevent drying. A humidity-adjusted boiling time correction can be estimated using the following guideline:
Below 500 meters (1,640 ft): Standard boiling time applies. 500–1,500 meters (1,640–4,920 ft): Increase boiling time by 5–10%. 1,500–3,000 meters (4,920–9,840 ft): Increase boiling time by 10–20%. Above 3,000 meters (9,840 ft): Use a pressure cooker or extend time by 20–30%.
Low humidity (<40%): Reduce boiling time by 5–8% (faster evaporation). Moderate humidity (40–70%): Standard time applies. High humidity (>70%): Increase boiling time by 8–12% (slower evaporation). Repurposing Household Tools for Small-Batch Boiling
When boiling frozen chicken in small quantities, household tools can be adapted to improve efficiency, reduce energy use, and maintain food safety. A colander or fine-mesh strainer can serve as a thawing and pre-boiling vessel by submerging frozen chicken pieces in cold water (10–15°C/50–59°F) for 15–20 minutes before transferring to the boiling pot. This pre-thawing step reduces the risk of thermal shock (uneven cooking) and shortens total boiling time by 20–30%.For individual servings or small batches, ice cube trays can be used to portion frozen chicken into uniform pieces, ensuring even cooking. Fill each tray cavity with 100–150g of frozen chicken, cover with water, and boil for 12–15 minutes (adjusting for altitude). This method also allows for batch cooking in a microwave-safe container, where chicken is partially thawed (50% reduction in ice crystal formation) before boiling.
Safety Considerations for Repurposed Tools:A slow cooker or Instant Pot can also be adapted for boiling frozen chicken with minimal modifications. Below is a step-by-step visual guide for setup:
Colander/Strainer: Ensure mesh size is <5mm to prevent small ice fragments from escaping. Ice Cube Trays: Use BPA-free plastic or silicone to avoid chemical leaching. Microwave Thawing: Limit to 50% thaw (never fully thaw) to maintain microbial safety.
Step-by-Step Setup for Slow Cooker or Instant Pot Boiling
- Container Preparation
- Slow Cooker:
- Line the bottom with a steam basket or trivet to elevate chicken 1–2 inches above the base, preventing direct contact with accumulated sediment.
- Use a microwave-safe liner (e.g., parchment paper) to simplify cleanup and reduce cross-contamination.
Critical Note: Never use metal utensils or reactive liners (e.g., aluminum foil) in slow cookers, as they can cause pitting or leaching.
- Water Volume:
- Slow Cooker: Maintain a 2:1 water-to-chicken ratio (e.g., 500g chicken = 1 liter water). Overfilling risks spillage during simmering.
- Instant Pot: Use the "Sauté" function to bring water to a rolling boil (100°C/212°F) before switching to "High Pressure" (if applicable) or "Keep Warm" mode for simmering. Pressure Cooker Adjustment: If using an Instant Pot on "High Pressure", reduce boiling time by 30–40% (e.g., 8–10 minutes for frozen boneless breasts).
The practice of boiling frozen chicken transcends a mere shortcut in meal preparation; it embodies a strategic fusion of food science and culinary pragmatism. By mastering the biochemical nuances of frozen poultry under heat, cooks can mitigate risks while maximizing efficiency, particularly in scenarios where thawing is impractical. The method’s advantages—preserved nutritional integrity, reduced waste, and adaptability to diverse recipes—position it as a viable alternative to conventional approaches. However, success hinges on adherence to precise techniques, from water temperature gradients to doneness verification, ensuring both safety and sensory quality. Ultimately, boiling frozen chicken exemplifies how innovation in cooking methods can align with scientific rigor, offering a sustainable and effective solution for modern kitchens.

Leave a Comment
Comments are moderated before appearing. The data you submit is processed according to the Privacy Policy of www.linuxunplugged.com.